Craftsman 944414460 chainsaw

User Manual - Page 4

For 944414460.

PDF File Manual, 23 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Keepunitsharpandcleanforbetter
andsaferperformance.
Followinstructionsforlubricatingand
changingaccessories.
Checkfordamagedparts.Beforefur-
_heruseofthechainsaw,aguardor
otherpartthatisdamagedshouldbe
carefullycheckedtodeterminethatit
willoperatepropertyandperfomqits
intendedfunction.Checkforalignment
ofmovingparts,bindingofmoving
parts,breakageofparts,mountingand
anyotherconditionsthatmayaffectits
operation.Aguardorotherpartthatis
damagedshouldbeproperlyrepaired
orreplacedbyaSearsServiceCentre
unlessotherwiseindicatedelsewhere
intheinstructionmanual.
Whennotinuse,chainsawsshould
bestoredinadry,highorlocked-up
placeoutofthereachofchildren.
Whenstoringsaw,useascabbardor
carryingcase.
HANDLE FUEL WITH CAUTION
Do not smoke while handling fuel or
while operating the saw.
Eliminate all sources of sparks or
flame in areas where fuel is mixed or
poured.
Mix and pour fuel in an outdoor area
and use an approved, marked con-
tainer for all fuel purposes. Wipe up
all fuel spills before starting saw.
Move at least 10 feet (3 meters) from
fueling site before starting.
Turn the engine off and let saw cool
in a non-combustible area, not on
dry leaves, straw, paper, etc. Slowly
remove fuel cap and refuel unit.
Store the unit and fuel in a cool, dry
well ventilated space where fuel va-
pors cannot reach sparks or open
flames from water heaters, electric
motors or switches, furnaces, etc.
GUARD AGAINST KICKBACK
Follow all safety rules to help avoid
kickback and other forces which can
result in serious injury.
Kickback Path
_, J_!_ Avoid Obstructions
Working Area
zt _
41_WARNING: Avoid kickback which
can result in serious injury. Kickback
is the backward, upward or sudden for-
ward motion of the guide bar occurring
when the saw chain near the upper tip
of the guide bar contacts any object
such as a log or branch, or when the
wood closes in and pinches the saw
chain in the cut. Contacting a foreign
object in the wood can also result in
loss of chain saw control.
Rotational Kickback can occur
when the moving chain contacts an
object at the upper tip of the guide
bar. This contact can cause the
chain to dig into the object, which
stops the chain for an instant. The
result is a lightning fast, reverse
reaction which kicks the guide bar up
and back toward the operator.
Pinch-Kickback can occur when the
the wood closes in and pinches the
moving saw chain in the cut along
the top of the guide bar and the saw
chain is suddenly stopped. This sud-
den stopping of the chain results in a
reversal of the chain force used to
cut wood and causes the saw to
move in the opposite direction of the
chain rotation. The saw is driven
straight back toward the operator.
Pull-In can occur when the moving
chain contacts a foreign object in the
wood in the cut along the bottom of
the guide bar and the saw chain is
suddenly stopped. This sudden stop-
ping pulls the saw forward and away
from the operator and could easily
cause the operator to lose control of
the saw.
REDUCE THE CHANCE OF
KICKBACK
Recognize that kickback can happen.
With a basic understanding of kick-
back, you can reduce the element of
surprise which contributes to acci-
dents.
Never let the moving chain contact
any object at the tip of the guide bar.
Keep working area free from obstruc-
tions such as other trees, branches,
rocks, fences, stumps, etc. Eliminate
or avoid any obstruction that your
saw chain could hit while cutting.
When cutting a branch, do not let the
guide bar contact another branch or
other objects around it.
Keep saw chain sharp and properly
tensioned. A loose or dull chain can
Loading ...
Loading ...
Loading ...