Loading ...
Loading ...
Loading ...
TROUBLESHOOTING TABLE - Continued
TROUBLE CAUSE REMEDY
Oi_inadequate 1. Oil tank empty. 1. Fill oil tank.
for bar and 2. Oil pump or oil filter 2. Contact Sears Service (see back cover).
chain clogged.
lubrication. 3. Guide bar oil hole 3. Remove bar andclean.
blocked.
Chain moves at 1. Idle speed requires 1.See"CarburetorAdjustment" in the
idle speed, adjustment. Service andAdjustments Section.
2. Clutch requires repair. 2. Contact Sears Service (see back cover).
Chain does not 1. Chain tension too 1.See"Check Chain Tension" in the
move when en- tight. Maintenance Section.
gine is acceler* 2. Carburetor requires 2. Contact Sears Service (see back cover).
ated. adjustment.
3. Guide bar rails 3. Repair or replace.
pinched.
4. Clutch slipping. 4. Contact Sears Service (see back cover).
5. Chain brake engaged. 5. Disengage chain brake.
Chain clatters 1. Chain tension incorrect.
or cuts roughly.
Chain stops
within the cut.
Chain cuts at
an angle.
2. Cutters damaged.
3. Chain worn.
4. Cutters dull, improperly
sharpened, or depth
gauges too high.
5. Sprocket worn.
6. Chain installed
backwards.
1. Chain cutter tops not
filed flat.
2. Guide bar burred or
bent; rails uneven.
3.Clutch slipping.
1. Cutters damaged on
one side.
2. Chain dull on one side.
3. Guide bar bent or worn.
1. See "Check Chain Tension" in the
Maintenance Section.
2. Contact Sears Service (see back cover).
3. Resharpen or replace chain.
4. See "Chain Sharpening" in the
Service andAdjustments Section.
5. Contact Sears Service (see back cover).
5. Install chain in right direction.
1. See "Chain Sharpening" in the
Service andAdjustments Section.
2. Repair or replace guide bar.
3. Contact Sears Service (see back cover).
1.See "Chain Sharpening" inthe
Service andAdjustments Section.
2. See "Chain Sharpening" in the
Service andAdjustments Section.
3. Replace guide bar.
If situations occur which are not covered in this manual, use care and good
judgement. If you need assistance, contact your Sears Service Centre.
21
Loading ...
Loading ...