Loading ...
Loading ...
Loading ...
SAVE THESE INSTRUCTIONS
HOW TO USE
DESCRIPTION OF PARTS
BEFORE FIRST USE
OPERATING INSTRUCTIONS
SETTING UP THE HEATER
NOTE:
CAUTION:
1
1
4
6
8
2
5
3
7
2
3
4
5
6
7
8
Infrared sensor
Base
Handle (can be used to store the remote control)
ON/OFF
Air outlet
Control panel
Flame eect
Air inlet (on the back)
Remove all packaging from the appliance.
Unpack all parts and check for damage that may have occurred during transportation.
If any parts are damaged or missing, do not use the appliance and return it to your
retail outlet immediately.
It is normal when heaters are turned on for the rst time, or if they have not been used
for some time, to emit some smell and fumes. This will disappear after a short time
(approx. 2 hours).
It is also normal for the heater to emit small crackling sounds when you rst turn it on.
This heater is designed for occasional or intermittent use and should not be left on for
prolonged periods of time.
The heater must always be placed in an upright position on a horizontal surface. Never
turn the heater upside down when in use as it could cause irreparable damage.
The heater does not have a device to control the room temperature. Do not use the
heater in small rooms occupied by persons incapable of leaving the room on their own,
unless constant supervision is provided.
To assemble the base, slot both halves of the base together. Insert the 4 screws (included)
in the holes on the underside of the base and tighten to firmly secure the base halves
together.
1.
03 04
Loading ...
Loading ...
Loading ...