Whirlpool SF362LXSB0 30 Inch Freestanding Gas Range

Use & Care Guide - Page 6

For SF362LXSB0.

PDF File Manual, 24 pages, Read Online | Download pdf file

SF362LXSB0 photo
Loading ...
Loading ...
Loading ...
COOKTOPUSE
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to IGNITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or while the grate
is unoccupied.
To Set:
1. Push in and turn knob counterclockwise to IGNITE.
All 4 surface burners will click. Only the burner with the
control knob turned to IGNITE will produce a flame.
2. Turn knob to anywhere between HIGH and LOW. Use the
Power TM Burner (on some models)
The left front burner is designed to give ultra-high power when it
is fully on. It can be used to rapidly bring liquid to a boil and to
cook large quantities of food.
ACCUSIMMER _ Burner (on some models)
The right rear burner has an adjustable heat setting for more
precise simmering and low temperature cooking.
Power failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to IGNITE. After burner lights, turn knob to
setting.
The Cooktop Lockout prevents unintended use of the surface
burners. When the cooktop is locked out, the surface burners
cannot be turned on by the control knobs.
When power is first supplied to the range, or if the range loses
power, the surface burners will be in the Cooktop Lockout
position. The surface burners cannot be activated until power is
restored to the range and (or) the Cooktop Lockout is
disengaged. Also, cooktop burners will be in the Cooktop
Lockout position during the self-clean cycle.
To Lock/Unlock Cooktop:
Before using, turn all control knobs to OFF. Press and hold the
Cooktop Lockout icon keypad for 3 seconds. A single tone will
following chart as a guide when setting heat levels, sound, and "Loc On" and a cooktop icon will appear on the
i
SETTING RECOMMENDED USE display. After 3 seconds the clock display will reappear.
Repeat to unlock cooktop. "Loc OFF" will appear on the display
IGNITE Light the burner, for 3 seconds, and the cooktop icon will disappear from the
HIGH
Between
HIGH and LOW
LOW
Start food cooking.
Bring liquid to a boil.
Hold a rapid boil.
Quickly brown or sear food.
Fry or saute foods.
Cook soups, sauces and gravies.
Stew or steam foods.
Keep food warm.
Simmer.
display.
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
A ............
I
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot. I
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
A. Burner cap
B. Burner base
C. Alignment pins
D. Igniter
E.Gas tube opening
Loading ...
Loading ...
Loading ...