Loading ...
Loading ...
Loading ...
10
MVP Group Corp - 5659 Royalmount Ave., Montreal, QC, Canada H4P 2P9
Tel: 514.737.9701 / 888.275.4538 - Fax: 514.342.3854 / 877.453.8832
[email protected] - www.mvpgroupcorp.com
Your water supply fits one of the following descriptions.
Greater detergent consumption is required with “hard” water.
GraIns parts
descrIptIon per Gallon per mIllIon
Soft Less than 1.0 Less than 17.1
Slightly
Hard 1.0 to 3.5 17.1 to 60
Moderately
Hard 3.5 to 7.0 60 to 120
Hard 7.0 to 10.5 120 to 180
V
ery Hard 10.5 and over 180 and over
deterGent tItratInG InstructIons
An Alkalinity Test Kit, as recommended by your chemical supplier, is required for proper chemical adjustment.
Follow kit instructions to test.
sanItIzer tItratInG InstructIons
After the water has agitated during the rinse cycle, open the sliding cover and dip a Chlorine test strip into the
tank for one (1) second. Immediately compare the strip to the scale on the side of the test strip container tube.
Adjust sanitizer (bleach) to 50 PPM, and iodine type sanitizer to 12.5 PPM. NOTE: Leaving the sliding cover
open more than 30 seconds will end the cycle and drain the tank.
Important note: Glasswashers are NOT water conditioners. Consult local water conditioning experts to
determine your specific water condition.
water condItIons
useFul InFormatIon about water, deterGent, & sanItIzer
Loading ...
Loading ...
Loading ...