Loading ...
Loading ...
Loading ...
Watersoftening system
The dishwasher requires soft water to ensure proper washing results.
Your appliance is equipped with an internal water softening system.
However, if you have a household water softening system, you will not
need to use this softening system.
The required amount of salt depends on the degree of hardness of your
tap water (See table for more information).
For the water softening system to function properly, it will need to use
dishwasher water softener salt .The amount of salt dispensed can be set
from "H:00" to " H:07". Salt is not required at H:00 (this is the default
factory setting).
, Open the door (for hidden controls only).
, Turn the unit on using the ON/OFF button.
, Hold down the [A] button and press START button until the display
indicates "H:00".
, Release both buttons.
, Press [B] to select the desired setting.
To change the setting,
, Press [C] button to select desired setting.
, Save the selected settings by pressing the START button.
, Close the door (for hidden controls only).
NOTE: For information on how to use the water hardness test strip,
provided in the detergent sample kit, please see below.
tap set value use
water hardness at
ppm CaCO3/I dishwasher salt
H:00 no
H:01 yes
H:02 yes
H:03 yes
H:04 yes
H:05 yes
H:06 yes
H:07 yes
0-110
120 - 140
150 - 180
190 - 210
220 - 290
300 - 370
380 - 540
550 - 890
Default setting from factory is H:00
Using a water hardness test strip
(t _), (e_ht ab- s (I _), _uttez ;
_Glt%_n u_ nach w_r ar_ _pare !_ deau et _m- ; zur mung
1 mtn a . _r i m_n, p_z _ 1 mR, , _r
>_ ;_ ,_ )aduret¢deteau
_J
I DDDDI
I DDDNI
I DDNNI
I DNNNI
I mmmml
0
0
2
4
6
no
no
yes
yes
yes
Loading ...
Loading ...
Loading ...