Loading ...
Loading ...
Loading ...
8
13. Remove the three light pan screws preassembled to
the light pan. Then, connect the 9-pin connector from
fan to the 9-pin connector from the light kit. Secure the
light kit with the previously removed light pan screws.
13
ASSEMBLY INSTRUCTIONS
15. Attach pull chain extensions to the pull chains.
Note: When facing the reverse switch, the fan pull chain is
on the right and the light pull chain is on the left.
Restore the power at the main fuse or circuit breaker.
Assembly is complete.
14. Install the E26-base LED bulbs into the sockets of the
light kit.
Important: Make sure you allow the bulbs and light kit to
cool before you replace the bulbs.
15
9-pin
Connector
Light Kit
Pull Chain Extension
Light Pan
Light Pan
Screw
Bulb
14
Loading ...
Loading ...
Loading ...