Loading ...
Loading ...
Loading ...
7
Blade Screw
Screw Cap
Blade Washer
Blade Arm
Blade
ASSEMBLY INSTRUCTIONS
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy in a clockwise direction until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all mounting bracket screws.
10
9
Canopy
Round
Hole
Mounting Bracket Screw
J-shaped Slot
10. Attach the blade to the blade arm using blade screw,
blade washer and screw cap from the hardware kit. Repeat
for each blade.
11. Install the blade arm to the top side of the motor with
motor screws previously removed (Step 3, page 5). Tighten
with Phillips screwdriver (not included). Repeat for each
blade arm.
Motor Screw
Blade Arm
11
12. Remove one of the four tter plate screws
preassembled to the tter plate and loosen the other three
but do not remove. Feed the 9-pin connector through the
center hole in the light pan. Align the keyhole slots in the
light pan with the loosened screws in the tter plate. Turn
light pan clockwise and replace the previously removed
tter plate screw. Tighten all screws.
9-pin Connector
Light Pan
Keyhole Slot
Fitter Plate
Fitter Plate
Screw
12
Loading ...
Loading ...
Loading ...