Loading ...
Loading ...
Loading ...
W415-1087 / A / 06.06.13
16
EN
A. Place the two side castings and the top casting pieces face down on a protected surface and assemble
the pieces as shown in Figure 1.
B. Line the holes of the casting with the holes on the casting bracket and secure in place using 8 screws.
Secure the casting support to the casting bracket using two screws, refer to Figure 1.
C. Loosely secure 2 screws to the holes in the side casting, refer to Figure 1. Repeat on other side.
D. Using the 8 screws provided, secure the four retaining brackets in place, refer to Figure 2.
E. Lift the casting and place the 4 screws into the retaining brackets and tighten fully, refer to Figure 2.
NOTE: To ensure the joints are fl ush adjustment may be necessary. To adjust the cast components
loosen the screws and then align the casting to desired position.
5.3 SURROUND INSTALLATION, TRADITIONAL CAST
B
E
C
D
FIGURE 1
FIGURE 2
Loading ...
Loading ...
Loading ...