Loading ...
2 134613200D (0609)
5 Attach the front brackets and spacer plates to
the pedestal with four #10 screws (2 per bracket).
Note: spacer plates are only for washers.
NOTE: If the washer or dryer were previously
installed, disconnect power cord from outlet,
inlet hoses from water faucets and exhaust
duct from dryer. Tape the drain hose to the top
of the washer to prevent water running out on
the floor.
6 Using two or more people, carefully lift the
washer or dryer onto the pedestal, tilting the unit
back slightly.
7 Set the unit down onto the pedestal making
sure the base of the unit is behind the front
brackets of the pedestal.
dryer washer
spacer plate
(only for
washers)
8 Engage the slots in the rear of the dryer with
the tabs of the rear brackets on the pedestal or
align the holes in the rear of the washer with the
slots of the rear brackets on the pedestal.
dryer washer
NOTE: If slots or mounting holes do not align,
make sure the washer or dryer leveling legs are
adjusted fully into the unit. Turn each leg tight to
the base.
Rear Bracket
dryer washer
Front Bracket
dryer /
washer
Loading ...
Loading ...
Loading ...