Loading ...
Loading ...
Loading ...
E,LLI.DATES
REGULAR SERVICE
DATES
Check Brake Operation _V'
Check Tire Pressure
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners If V's
A Sharpen/Replace Mower Blades I_
CTo! Lubhcation Chart _4- _'
Check Battery Level
R I Clean Battery and Terminals V'
I
Check Transaxte Cooling I_#
Check V-Belts
Check Engine Oil Level I_ V'
Change Engine Oil (with oil filter) V'l,;
v'
G Clean Air Screen
_! Inspect Muffler/Spark Arrester
Replace Oil Filter (If equipped) I_h2
Clean Engine Cooling Fins _ 2
Replace Spark Plug _ If
Reptace Air Filter Paper Cartddge _2
Replace Fuel Fitter
I - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERALRECOMMENDATIONS
3 - Replace blades more olten when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery,
5 - Tighten front axle pivot bolt to 35 It.-Ibs, maximum.
Do not overtighten.
LUBRICATION CHART
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
• from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
IMPORTANT: Do not oil or grease the
_ivot points which have special nylon
earings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If )/ou feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
(Dsr
Zerk Zerk
(_Front Wheel _el
Bzeearrking i\_.. i,g Zerk
(_Engine_
1
I
i ,
i
OGeneral Purpose Grease
_)Refer to Maintenance "Engine" Section
19
Loading ...
Loading ...
Loading ...