Loading ...
Loading ...
Loading ...
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the
Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The _o_) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents
v
the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked
individually.
INSTRUCTIONS
To activate the Oven Lockout feature
1. Press @.
2. Press and hold @o_ for 3 seconds.
3. After 3 seconds a beep will sound, "DOOR", "LOCKED" will
flash and "Loc", "UPPER" and _ will appear in the display
(Fig. 1). Once the oven door is locked the "DOOR" and
"LOCKED" indicator will stop flashing and remain in the
display. Allow 15 seconds for the oven door to lock.
PRESS DISPLAY
@.
_for Fig. 1
3 seconds
To reactivate normal oven operation:
1. Press(_.
2. Press and hold _ for 3 seconds. A beep will sound.
v
"UPPER" "LOC" and _ will disappear from the display.
"DOOR" and "LOCKED" will flash in the display until the oven
door has completely unlocked.
2. The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower
oven can be used when the upper oven lockout feature is on.
for
3 seconds
Setting Silent Control Operation
The DELAY START _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. Press and hold _ for 6 seconds (Fig. 2). After 6
seconds, a
beep will sound and "SP" (Speaker) will appear in the display
(Fig. 3).
2. Press @ to switch between normal sound operation and
silent operation mode.
If "SP" appears (Fig. 3), the control will operate with normal
sounds and beeps. If %=" appears (Fig. 4), the control is in the
silent operation mode.
3. Press _ARTj._to accept the change or press _o_) to reject
the
change.
PRESS
@
for 7 seconds
@
DISPLAY
Fig. 2
Fig. 3
Fig. 4
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if
the control is set to silent operation.
10
Loading ...
Loading ...
Loading ...