Loading ...
Loading ...
Loading ...
Problem Possible Causes What to Do
Overlying
No fabric softener was used
Synthetics, permanent press
and blends can cause static
', Try a fiabric softener.
• Adjust controls for less drying.
• Try a fabric softener,
• Try a fabric softener
Improper sorting Separate heavy items from light weight items
(generally, a well-so_:ted washer load is a
well-sorted dryer lo:td).
Large loads of heavy items • Large, heavy loads contain more moisture
(like beach towels) and take longer to dry. Separate large, heavy
items into smaller loads to speed drying time.
Controls improperly set • Match control settings to the load you
are drying.
Lint filter is full • Clean lint filter before every load.
Improper or obstructed • Check installation instructions fi)r proper
ducting ducting/venting.
Blown fuses or tripped
circuit breakers
Overloading/
combining loads
Underloading
Make sure ducting is clean, free of kinks
and unobstructed.
Check to see if outside wall damper
operates easily.
See the Venting the Drying section.
Replace fuses or reset circuit breakers. Since
most dryers use 2 fuses/breakers, make sure
both are operating.
Do not put more than one washer load in
the dryer at a time.
If you are drying only one or two items,
add a few items to ensure proper tumbling.
1'8
Loading ...
Loading ...
Loading ...