Loading ...
Loading ...
Loading ...
Instructions
for the user
At the ends of the legs of the racks there are
silicone rests with a hole that must be centred
onto the matching fixing pins on the hob.
To position the rack, you first need to centre the
fastening pins (1) and (2) and then lower it until
it is resting on the hob.
When properly positioned, the legs of the racks
must not be suspended above the hob but
should rest on top of it.
Make sure that the racks are simply centred on their respective burners,
without forcing the burners to be raised or tilted. If they are, repeat
the positioning procedure.
INCORRECT INCORRECT CORRECT
5.2 Lighting the burners using a safety device
The appliance is equipped with electronic ignition. Simply press the knob
and simultaneously turn it anticlockwise to the minimum flame symbol , until it
lights. Hold down the knob for about 2 seconds to keep the flame lit and to
activate the
safety device. The burner may go out when the knob is released. If this
happens, repeat the procedure, holding the knob down for longer.
If the burners should go out accidentally, after about 20 seconds a safety device
will be tripped, cutting off the gas supply, even if the gas tap is open.
11
Loading ...
Loading ...
Loading ...