Loading ...
Loading ...
Loading ...
8
Fastening the adapter cover
Use the supplied adapter cover to prevent the USB wireless adapter (optional) from
coming off easily and prevention from burn injury.
1.
Loosen the screw on the bottom left of the USB TYPE A port.
2.
Insert the tab of the cover into the hole at the upper right of the USB TYPE A
port in the direction of the arrow.
3.
Align the screw holes on the projector and the cover. Then insert the screw
removed from the projector into the hole and tighten the screw.
WARNING ►Keep small parts away from children and pets. Take care not
to put in the mouth. Heat may build up in the USB wireless adapter, to avoid
possible burns disconnect the projector power cord for more than 10 minutes
before touching it.
NOTE • Do not turn on or off the projector while connected to a device in
operation, unless that is directed in the manual of the device.
• Some input ports are selectable in the use. For details, see User’s Manual -
Operating Guide. (
1)
• Be careful not to mistakenly connect a connector to a wrong port.
• If an oversized USB storage device blocks the LAN port, use a USB extension
cable to connect the USB storage device.
Manufacturing year and month
The manufacturing year and month of this projector is indicated as follows in the
serial number of the rating label on the projector.
Example:
F 8 C x 0 0 0 0 1
Manufacturing month: A = January, B = February, ... L = December.
Manufacturing year: 8 = 2018, ... 0 = 2020, 1 = 2021.
MC-EW5001
MC-EX5001
MC-EU5001
MC-EU4501
123
Tab
Loading ...
Loading ...
Loading ...