Loading ...
The HydroSensor II has a 3-part telescoping shaft.
1. To extend the HydroSensor II, grasp the smallest tube and
pull until the spring button pops into place. If the tubes do
not extend easily, make sure the knurled knobs are loose.
2. Tighten both knurled knobs, to make sure the telescoping
tubes remain unbending.
3. Do not exert too much force when using. Excess force
may damage the tips or telescoping tubes.
SPECIFICATIONS
HydroSensor 1-piece stainless steel shaft
31"
HydroSensor II 3-piece telescoping aluminum shaft
31" extended; 17" collapsed
Probe tips - 7/8” Nickel plated steel
Handle Injection molded
Indicator light LED in handle
Weight 1 lb.
Battery One 9-Volt DC (included)
MAINTENANCE
Clean and dry the HydroSensor after each use.
Battery Replacement
The HydroSensor is operates on the current from one 9-volt
battery. Battery life depends on usage and storage care. Do
not allow probe tips to stay in contact with metal, damp cloth,
carpet, water, cork or any other materials that will conduct
electricity. The battery is contained inside the handle below the
indicator light.
1. Remove the small screws which hold the handle halves
together, and gently split apart the handle.
2. Remove the old battery from its connectors and replace
with a new Eveready general-purpose 9-volt battery No.
216 (or comparable).
3. Reinsert battery into handle, taking care not to pinch any
wires.
4. Align the holes of the handle halves and replace the
screws. Do not over-tighten screws.
Note: Probe tips may be sharpened with a file. If points need
replacement because of excessive wear, contact Dri-Eaz
Products for a replacement HydroSensor Point Set Kit.
Other Moisture
Detection Tools
WetChec ✔
The WetChec✔ is a moisture probe similar in operation to the
HydroSensor, since it beeps when its probes contact moisture
or urine. It is an inexpensive marketing tool that contractors
give to customers on their restorative drying jobs, insurance
adjusters, property managers, and other clients.
Moisture Counter Non-Destructive Meter
Use the Moisture Counter for quick measurements when doing
preliminary inspection to determine if moisture is present. The
Moisture Counter allows you to rapidly evaluate where mois-
ture is a problem without penetrating the material's surface. It
also helps you to be positive when materials are completely
dry and returned to original condition.
Moisture PRO Penetrating Meter
The Moisture PRO is a hand-held penetrating instrument de-
signed to very accurately measure moisture content in wood,
drywall and other porous building materials. It is portable, bat-
tery powered and pocket sized, incorporating the latest elec-
tronics in a durable yet lightweight aluminum housing. The
Moisture PRO digital LCD gives moisture readings in wood
from 7% to 42% in 0.1% increments. A choice of interchange-
able electrodes is available including a shallow penetration,
hammer type and deep wall type.
FOR PARTS AND SERVICE CALL YOUR LOCAL DISTRIBUTOR,
or the Dri-Eaz Service Department at (360) 757-7776.