Loading ...
Loading ...
Loading ...
MAINTAINING YOUR 3-IN-1 CLEANER
5. After cleaning the dirty water tank and the solids
separator, allow them to air-dry in a well-ventilated
area for at least 24 hours. To reinstall the tank, insert
the bottom into the opening in the main body, then
tilt the tank back until it clicks into place.
1. Turn o the power.
2. Remove the brushroll cover, brushroll, and dirty
water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
5
CHECKING FOR BLOCKAGES
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or
objects caught in the brushroll, nozzle chamber, or inlet hose.
MAINTAINING YOUR 3-IN-1 CLEANER
TROUBLESHOOTING
WARNING: To reduce the risk of shock and unintended operation, turn o power before servicing.
NOTE: If 3-in-1 Cleaner still does not operate properly, contact Customer Service at 1 800 798 7398 or
sharkclean.com/support
sharkclean.comsharkclean.com
LED INDICATOR WHAT IT MEANS WHAT TO DO
The Water Droplet LED is
pulsing red.
The dirty water tank is full.
Empty the fluid in the dirty
water tank.
*If this is a false error, remove
solids separator and clean
completely. Allow part to dry
for 24 hours or dry manually.
The Water Droplet LED is
pulsing aqua.
The clean solution tank is
empty.
Fill the clean solution tank.
Refer to the “Filling the Clean
Solution Tank” section.
The Area Rug icon and the
three water droplet lights are
flashing red at the same time.
Brushroll cover is not installed
properly.
Refer to the “Cleaning the
Brushroll” section, step 4
The Area Rug icon and the
three water droplet lights
are flashing red out of sync.
The brushroll is jammed.
Turn o the power before
cleaning the brushroll and any
debris that may be causing
the jam. Refer to the “Cleaning
the Brushroll” section.
Self-Clean icon and droplets
are flashing blue.
Not enough solution to run
Self-Clean Cycle.
Fill clean solution tank to
allow self-clean cycle to run.
Self-Clean icon and droplets
are flashing red.
Dirty water tank is full and
preventing Self-Clean Cycle to run.
Empty dirty water tank to
allow self-clean cycle to run.
Loading ...
Loading ...
Loading ...