Loading ...
Loading ...
Loading ...
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
[] TRANSFER CENTER HINGE
BRACKET TO THE LEFT
Remove tile center hinge bracket by removing
tile three screws.
NOTE: Keep these screws with tile hinge bracket.
They are long screws and will be used when installing
tile hinge on the other side.
You will need m remove tile color-matched cap from
tile screw head before you can remove tile screw.
Use the edge of a thin flat blade to gently pry the
caps offthe screw heads. (A putty knife works well
for this.) Cover tile blade with tape to prevent
scratching the paint.
Remove the mullion cover from the left side using
the thin flat blade. Assemble it to the right side.
Remove the screw from the center left side of the
cabinet. Screw it into the holes on the right side.
Place the center hinge bracket over the holes at
the center left side of the cabinet, lnsert and
tighten the three long screws.
Replace the cap by snapping it over tile screw with
your fingm:
[] TRANSFER DOOR STOPS
On each door, move tile metal door stop from tile
right to the left.
Move any screws from the left to tile right.
[] TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
To remove the handle: Remove the plug button by
carefhlly prying under the edge Mth a putty knif_e.
Remove the exposed screw holding the handle.
t
HandlePlug
Remove the two screws holding tile handle to tile
top of tile door.
LongHandle
Short
Screw
Hole
N
ShortHandle
andle
Plug
Handle
_lug
After removing the handle: Move the small plug
buttons from tile top right side of the door top and
insert them into the holes on the opposite side.
Small
Buttons
Move the large plug button from tile left edge of the
door and insert it into tile hole on the opposite side.
PlugButton
2O
Loading ...
Loading ...
Loading ...