GE - General Electric GTS22UBPARBB GE refrigerator - p series

User Manual - Page 16

For GTS22UBPARBB.

PDF File Manual, 92 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE WATER LINE (CONT.)
[] FASTEN THE SHUTOFF VALVE
Fasten the shutoffvah,e to the cold water pipe with
the pipe clamp.
Pipe Clamp_
Saddle-Type_4 VerticalCold
ShutoffValve Water Pipe
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered m. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumbm:
[] TIGHTEN THE PIPE CLAMP
Tighten the clamp screws until the sealing washer
begins to swell.
NOTE: Do not overtighten or you may crush the
tubing.
Washer
PipeCiamp--_j_ _lnlet End
ClampScrew
[] ROUTE THE TUBING
Route the tubing between the cold water line and
tile refrigerator.
Route the tubing through a hole drilled in the v_-all
or floor (behind tile refrigerator or adjacent base
cabinet) as close to the wall as possible.
NOTE: Be sure there is sufficient extra tubing
(about 8 feet [244 cm] coiled into 3 turns of about
10" [25 cm] diameter) to allow tile refrigerator to
move out from the wall after installation.
[]
CONNECT THE TUBING
TO THE VALVE
Place the compression nut and ferrule (sleeve)
for copper tubing onto the end of the tubing and
connect it to the shutoff valve.
Make sure the tubing is fl.dly inserted into the valve.
Tighten tile compression nut securely.
For plastic tubing from a GE SmartConnect ''_
Refrigeratur Tubing kit, insert the molded end
of the tubing into the shutuff valve and tighten
compression nut until it is hand tight, then tighten
one additional turn with a wrench. Overtightening
may cause leaks.
Nut
Saddle-Type
ShutoffValve SmartConnecU
Tubing
PackingNut
OutletValve / \ Ferrule(sleeve}
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered tu. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumben
[] FLUSH OUT THE TUBING
Turn the main w-ater supply on and flush out the
tubing until the water is clear.
Shut the water offat the water valve after about
one quart (1 liter) of water has been flushed
through the tubing.
16
Loading ...
Loading ...
Loading ...