Simpson Cleaning PS60918-S User Manual

Loading ...

Before connecting a water supply hose, be sure the water supply is capable of providing an

uninterrupted source of clean, cold water at a minimum rate of 5 gallons per minute (GPM)

and20poundspersquareinch(PSI)ofpressure.Onceaproperwatersupplyissecured,

follow the instructions below to connect both the water supply and high-pressure hoses to

the pressure washer.

CONNECTING HOSES

Verify the inlet screen is free of

any dirt or debris and is in place

with the convex side facing out.

Turn on the water supply and

run for 30 seconds to purge any

debris from the supply hose.

Then,turno�thewatersupply

and thread the water supply hose

into the pump inlet.

While pulling back on the pump

outlet collar, insert the hose

connector then release the collar.

Gently tug on the hose to make

sure it is locked.

While pulling back on the hose outlet collar, insert the gun connector then

release the collar. Gently tug on the hose to make sure it is locked.

Page 11

Loading ...

Simpson Cleaning PS60918-S Pro Series PS60918