Loading ...
Loading ...
Loading ...
Electrical requirements
WARNING
• The owner shall ensure the electrical service meets electrical requirements and that
the electrical outlet is properly installed by a licensed electrician.
• To reduce risk of fire, electric shock, or personal injury:
- Do not use an extension cord or adapter plug with this cooktop.
- The power cord has an equipment-grounding conductor and a grounding plug.
- Ensure a properly grounded outlet is installed by a qualified electrician.
- All wiring and grounding must comply with local codes, or, in their absence, with
the National Electrical Code, ANSI/NFPA No. 70 – Latest Revision (US), or the
Canadian Electrical Code CSA C22.1 – Latest Revisions and local codes.
- The wiring diagram is inside the burner box.
- The cooktop ignition system only operates if the outlet is properly polarized.
- The cooktop requires a 120 V, 60-Hz, AC, approved electrical service with 20-amp
circuit breaker or time-delay fuse.
NOTE
Re-ignition may malfunction if the voltage between Neutral and Ground is over 20 VAC.
Make sure the voltage is under 20 VAC.
• The plug must be firmly inserted in a properly installed, three-prong outlet per local
codes. After a malfunction or breakdown, grounding decreases the risk of electrical
shock by providing the current a safe path.
• Do not use a damaged power plug or loose wall outlet.
• Do not remove the plug's grounding (third) prong. If the plug and outlet do not match
or you have any doubt, have a qualified electrician check the outletand circuit to
ensure the receptacle is properly grounded, and install the proper outlet if needed.
• NEVER connect ground wire to plastic plumbing lines, gas lines, or water pipes.
Additional installation requirements for mobile homes
Installation of appliances designed for mobile-home use must comply with the
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly
the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280)
or, when such standard does not apply, the Standard for Manufactured Home
Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI
A225.1, latest edition, or with local codes. In Canada, mobile home installation must
comply with the current CAN/CSA Z240/MH Mobile Home Installation Code.
18 English
Loading ...
Loading ...
Loading ...