Loading ...
Loading ...
Loading ...
Programmable functions
78
Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
= Lock code switched off (fact-
ory default setting)
= Lock code is switched on
Using the washing machine with a
lock code
The code is 125 and cannot be altered.
Switch on the washing machine.
appears in the time display and
the and sensors light up.
Touch the sensor.
appears in the time display.
Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number us-
ing the and sensors.
Also enter the second and third num-
bers and confirm the numbers with
the Start/Stop sensor.
The lock is released and a wash pro-
gramme can now be selected and star-
ted.
Switch-off tone volume
An audible tone sounds to confirm
when the washing machine is
switched off.
Options
= Switch-off tone is set to nor-
mal volume (factory default
setting)
= Switch-off tone is set to loud
volume
Control panel switch-off
status
To save energy the time display and
sensors will go out after 10minutes,
and only the Start/Stop sensor will
flash slowly.
Options
= Off
The time display and sensors
will remain lit up while the
washing machine is switched
on
= On (factory default setting)
The time display and sensors
will switch off after 10minutes
if the programme is started.
However; the time display and
sensors will remain lit up for
10minutes after a delay start
time has elapsed, after the end
of the programme or at the end
of the anti-crease phase.
Loading ...
Loading ...
Loading ...