Loading ...
Loading ...
Loading ...
*Operating your beverage cooler
1) Turning on your beverage cooler. Plug in and switch on the beverage cooler
by pressing on the power button for a few seconds. When you use the
beverage cooler for the first time (or restart the beverage cooler it has been
switched off for a long time), there will be a few degrees variance between
the temperature you have selected and the one indicated on the LED readout.
This is normal and it is due to the length of the activation time. Once the
beverage cooler is running for a few hours everything will stabilize.
Important: If the unit is unplugged, power is lost or switched off, wait 3 or 5
minutes before restarting the unit. The beverage cooler might not start if you
attempt to restart before this time delay.
2) Operating noises. To reach the desired temperature settings, Euro beverage
cooler, like all beverage coolers operating with compressors and fans, may
produce the following types of noises. These noises are normal and occur as
follows:
- Gurgling sound, caused by the refrigerant flowing through the appliance’s
coils;
- Cracking/popping sounds, resulting from the contraction and expansion of
the refrigerant gas to produce cold;
- Fan operating sound, to circulate the air within the beverage cooler.
3) Loading your beverage cooler. You might load your cans or bottles
standing or lying in single or double rows while taking note of the following:
Loading ...
Loading ...
Loading ...