Loading ...
Loading ...
Loading ...
*Installing your beverage cooler
Unpack and remove all of the protection and adhesive strips from the packaging
around and inside the beverage cooler.
Important: Before connecting the unit to
a power source, please let it stand upright for approximately 24 hours. This will
reduce the possibility of a malfunction in the cooling system from handling
during transportation.
The beverage cooler must be positioned so that the plug is accessible.
Release the power cord and move your beverage cooler to the selected
location. The beverage cooler should be installed in a suitable place where the
compressor will not be subject to physical contact.
Note: For freestanding installation, the beverage cooler requires 30mm gap on
both sides as well as the rear. This allows the proper air circulation to cool the
compressor and condenser. For built-in installation, the beverage cooler
requires 10mm space on each side and at the top as well as 30mm space at
the rear. The air vent at the front must never be covered or blocked in any way.
*Levelling your beverage cooler
Beverage cooler must be levelled before loading your beverages. Your
beverage cooler is equipped with 4 adjustable feet to facilitate easy levelling.
Loading ...
Loading ...
Loading ...