Loading ...
Loading ...
Loading ...
8
Reversing the Door Swing
NOTE: For safety, it is recommended at least two people are present when reversing the direction of
the door swing.
You may choose to open your unit from the right or the left side. To reverse the direction of your
door opening, follow the steps below.
CAUTION: Before reversing the direction of the door swing, disconnect the unit from the power
source.
In addition to the accessories packed with the unit, you will need:
• Medium-sized Phillips head screwdriver
• Small, flathead screwdriver
1. Remove the hinge cover with a Phillips head screwdriver, approaching the cover from the back.
Save the hinge covers.
2. Remove the three hinge screws, and save them for later use.
3. Push the top hinge forward, carefully remove the door, and set aside.
NOTE: Set the upper door on a soft cloth to prevent any scratching or damage when not installed on
the unit.
4. Pry the screw cover cap off of the opposite side of the door hinge to uncover the screw hinge
holes.
5. Replace the screw cover cap to cover the holes created by removing the door hinge. This will
require some force.
Loading ...
Loading ...
Loading ...