Loading ...
Loading ...
Loading ...
13
5.MOUNTING THE HOPPER TO THE CHAMBER
1.Remove the 4 Gaskets and Bolts from the Hopper, open the Lid, insert the Hopper into the
Chamber, then using these Bolts and Gaskets install it in sequence from inside, as shown.
2. Locate the RTD plug-in connector coming from the mounted RTD inside the grill frame.
Connect this with the mating connector located on the outside of the hopper burner
assembly. NOTE: excess wire on the RTD plug should remain outside the Chamber.
6.Installation instructions for RTD Temperature Probe
1.Remove the screws from the left plate of the grill chamber.
2.Use the screws through the RTD Temperature Probe and fix on the left plate of the grill
chamber.
3.The distance between the RTD Temperature Probe and the left panel of the grill chamber
should be kept about 14mm, otherwise the RTD Temperature Probe effect will be affected.
Loading ...
Loading ...
Loading ...