Loading ...
Loading ...
Loading ...
9
1.ASSEMBLING OF BOTTOM BASE
1.Push the Axle (11) through the wheel (12)
、
Gasket (J) and then through the hole in the legs
(6)(13) as shown. The Gasket (I), Spring Washer (M), and Cap Nut (H) are used to secure
the wheel assembly in place. Repeat for the other wheel. Press the Wheel Caps (9) firmly
into the outer recess on the wheels as shown.
2.Lift up the Chamber (4) on the Body Frame. Align the Chamber holes with the Frame holes
and secure with Bolt (A), as shown.
Note: During assembly two people will be required to lift four legs onto the chamber.
Loading ...
Loading ...
Loading ...