Loading ...
Loading ...
Loading ...
Door Removal and Reversal Instructions
ToolsNecessory:
Phllll_ = heod
of
Quodrox ',1_1(]
screwddver WrenchSet
Adjustable
'_kench
?
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
Cabinet Hole • _ Top Hinge
Plugs ]
Hinge Hole
Plug
NOTE: The direction inwhich your refrigerator doors open (door swing)
car- be reversed, from left to right or right to left. by moving Lhedoor
hinges from one side to the other. Reversing lhe door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the watt outlet. Remove
any food from door shelves.
Door
Screw_ Stop
/Hinge
screeNS
Hinge Hole
Plug
Door Stop Door
krew_ Stop
_ Hinge
1. Remove top hinge cover.
2. Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure olastic washer stays on hinge oir
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove
inside screw and install center hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside
screwsin holes and tighten. Inside screw will go to opposite side
in step 8
8. Remove two outside screws on opposite side of refrigerator and
install bottom hinge. Insert and tighten screw saved from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge om
to other hole in hinge and tighten with adjustable wrench.
10. Move freezer and refrigerator door stops to opposite side. Before
starting screws, use an awl to puncture the foam.
11. Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close refrigerator
door to help align hinge hole.
12. Tighten center hinge pin with adjustable wrench.
13. Remove cabinet and hinge hole plugs and move to opposite side.
14. Lower freezer door onto center hinge pin.
15. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to install top hinge.
16. Replace top hinge cover.
17. Plug in electrical _ower cord and turn refrigerator temperature control
to center position. Adjust setting as necessary.
Loading ...
Loading ...
Loading ...