Loading ...
Loading ...
Loading ...
9
Adjusting Height
1. Adjust the front feet with a screwdriver to stabilize the
dishwasher and raise it to meet the hieght of the
enclosure.
2. Adjust the rear feet with a screwdriver to balance and
raise the dishwasher to the appropriate height of the
enclosure.
NOTE: Make sure the dishwasher is plumb with the top of
the enclosure. It does not need a large clearance underneigh
the counter top.
• Make sure the dishwasher is plumb and notice dishwasher can be placed with a small clearance
under the counter top.
• For front feet, turning the feet in the direction of the black arrows with the slot screwdriver allows
the dishwasher to move downwards.
• For rear feet, turning the Philips screwdriver in the direction of the black arrows will take the
dishwasher feet down.
If the height of the enclosure is 33 7/8" to 35
7/8" (860mm-910mm) use short supports as
shown in the figure.
Water Supply Connection
Water supply may be connected to the dishwasher in one
of two ways:
• With metal braided hose.
• With copper tubing BRAIDED HOSE/COPPER
TUBING
• After connections are made turn on the water supply to
check for leaks.
• Hot water supply line: Use minimum 3/4" O.D. copper
tubing or metal braided dishwasher supply line.
• Water Inlet valve of dishwasher has 3/4"-11.5NH inlet coupling thread dimension according to
ASME B1.20.7-1991.
• When you buying water inlet hose for your dishwasher, please choose the thread dimension of
the inlet hose as compatible with indicated water inlet valve inlet coupling thread dimensi- on
(3/4"-11.5NH) of your dishwasher.
• Temperatures required for soldering and sweating will damage the dishwasher's water inlet valve
so if any such operation is needed, keep the heat source min. 77/8" (200mm) away from the
dishwasher's water inlet valve.
• There should not be any sharp bends in the water line that may restrict the water flow.
• Teflon tape or pipe tread compound must be used for sealing the connection. Before connecting
the copper water supply line to the dishwasher, flush it with hot water to clear foreign material.
Loading ...
Loading ...
Loading ...