Loading ...
Loading ...
Loading ...
17
INSTALLER CHECKLIST
Your installer must have completed the following:
• The dishwasher is square the level.
• The dishwasher is fastened securely to the cabinetry.
• The dishwasher door opens and closes freely. The dishwasher door must close without hittng
any cabnetry or the counter top.
• The inlet water supply is turned on and checked for leaks.
• The drain hose has been connected and checked for leaks. There must be no kinks or
obstructions in the drain hose.
• The drain hose must be installed with a 28” (710mm) high drain loop for drain hook-ups without
any air removed.
• If ou connect the water drain hose to a tap spigot under the sink, remove the plastic membrane.
If you do not remove the entire membrane, remaining food can cause a blockage in the drain
hose spigot.
• The spray arms are free and rotate freely.
• The rinse cycle has been run.
• The water level wil be below the filter screen after the end of th ewash program. It is normal to
find some water in the drain filter area.
FINAL INSTRUCTIONS
1. Press the On/Off button to turn the dishwasher on.
2. The power indicator light will illuminate.
3. Use the Program Select button to choose a washing program.
4. Start the program with the Start/Pause/Cancel button.
5. Run the dishwasher through one complete cycle. When the wash cycle is completed, use the
On/Off button to turn the dishwasher off.
HELPFUL HINTS
Issue
Possible Solution
The control screen does not turn on.
Check to make sure the breaker to the
dishwasher is in the on position.
Check to make sure the power supply cord is
plugged in.
No water is coming into the dishwasher.
Check to make sure the water shut-off is in the
ON position.
Water does not drain.
Make sure the drain hose is not kinked or
comes out of the air gap next to the sink.
Remove the drain hose from the disposal,
making sure the plug is removed.
If your dishwasher is not operating properly after trying the above suggestions, contact your local
appliance dealer and schedule an authorized service agent to inspect your new dishwasher for any
function-related failure.