Loading ...
Loading ...
Mouli Engineering Inc. © 2014; U.S. Patent No. 8,716,889 Rev. 8 May 23, 2014
10. Two grade 8 “gold” bolts are used to fasten the telescopic legs to the appropriate tile angle. Now
the whole SolarPod
TM
is all mechanically connected.
11. Now the electrical portion begins.
12. The A1 section has wire coiled up. Release this coil by cutting out the tie wrap. Extend the wire
all the way towards A4. Using the tie wraps provided, secure the wire to the frame. Ensure most
of the cable is tucked underneath the metal frames.
13. Connect the three micro-inverters in A2, A3 and A4 as shown in A1. Push all the way to ensure
that the connection is secure and tight.
14. Then we run the wire from the the facility using the four wire 240V / 30A adapter.
15. Connect the adapter to a dedicated 20A two pole circuit breaker and you are making solar power.
16. Run #6 ground wire through ground lug provided and use a ground rod appropriately distanced to
ground the SolarPod
◌
TM
Grid Tied.