Loading ...
Loading ...
Loading ...
38
C
¡
¢
£
¤
¥
¡
¦
§
¨
©
ª
«
¬
®
«
¬
¯
°
±
«
¯
©
ª
«
¬
®
«
¬
¯
°
²
®
°
¯
T
°
³
´
µ
¶
¯
«
¬
³
³
·
ª
¸
¹
PROBLEM POSSIBLE CAUSE SOLUTION
Grinding,
grating,
crunching
or buzzing
sounds
A hard object or powder
detergent granules have
entered the wash module.
IMPORTANT: Clear glass
is hard to see in water.
and could result in a cut
wound.
Using care, remove the
hard object. If the noise
was caused by detergent
granules, the noise should
stop once the detergent is
ground up.
NOTE: If the noise persists
after a complete cycle, call
for service.
Beeps
Indicates the wash cycle is
completed.
NOTE: A rapid beep
indicates an error
condition.
This is normal.
See “Error Codes” for
further direction.
Suds in the
Tub
Used wrong type of
detergent.
Use only detergent
approved for automatic
dishwashers.
Dishwasher
Leaks
Excessive suds caused by
using improper detergent.
Use only detergent
approved for automatic
dishwashers.
Dishwasher is not level. Level the Dishwasher. See
Installation Instructions.
Rinse Aid
light is on
The Rinse Aid level is low. Add liquid Rinse Aid.
DISHES ARE NOT COMPLETELY CLEAN
PROBLEM POSSIBLE CAUSE SOLUTION
Food
residue
remains
on the
dishes
Dishwasher is not
loaded correctly.
See “Dishwasher Loading.”
The wrong wash
cycle for the dish
load was selected.
Select the wash cycle based on the
most difficult soil in the dishwasher load.
If you have some items with heavier
soils, use a heavier washing cycle.
Water
temperature is too
low.
For best results, the temperature of the
incoming water should be a minimum
of 120°F (49°C).
Used incorrect
amount of
detergent.
Use a minimum of 1 Tbsp. (15 g)
detergent per load. Heavy soil and/or
hard water generally requires additional
detergent.
Loading ...
Loading ...
Loading ...