Loading ...
Loading ...
Loading ...
Cleaning tools
Tools allow for cleaning surfaces
above the floor and for reaching
hard to clean areas.
The cleaner is ready for tool use
when handle is in upright position.
CAUTION: The agitator continues
to rotate while cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs or carpeted
stairs during tool use.
1"-_11
How to clean tools
To clean the hose and powered
hand tool, wipe off dirt with a cloth
dampened in a mild detergent.
Rinse with a damp cloth. DO NOT
submerge powered hand tool in
water.
Cleaning tools may be washed in
warm water with a detergent. Rinse
and air dry before using.
Removing hose
When using cleaning tools, cleaner
handle should be in the upright
position. Also, turn cleaner OFF
before disconnecting and con-
necting hose to hose tube (A).
To use hose, lift hose end (B) as
shown.
When you are finished cleaning with
the tools, reposition hose end onto
tube.
Select proper tool
C. Combination tool use with
brush attached for carved furniture,
table tops, books, lamps, lighting
fixtures, venetian blinds, base-
boards, shutters, and registers.
Remove brush to clean upholstered
furniture, draperies, mattresses,
clothing, and carpeted stairs.
D. Powered hand tool may be
used for upholstered furniture,
draperies, mattresses, clothing,
automobile interiors, and carpeted
stairs.
E. Crevice wand may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture,
stairs and baseboards. It can also
be used for extra reach with the
dusting brush.
ml
Attach wand and tools
Attach tool to the hose (F) by push-
ing it firmly onto hose.
Twist wand or tool slightly to tighten
or loosen the connection.
Combination tool
Slide brush to remove.
To replace brushes, align brush with
grooves on tool. Slide brush into
place.
Familiarize yourself with these home
maintenance tasks as proper use
and care of your cleaner will ensure
continued cleaning effectiveness.
A
Air flow indicator
The indicator (A) will show red when
the dirt cup is full or there is a block-
age or clog in the system. Turn
cleaner OFF and unplug. Check
the dirt cup and empty if necessary.
Turn cleaner back on. If the indicator
still shows red, follow the instruc-
tions under "Clearing blockages".
Loading ...
Loading ...
Loading ...