Loading ...
Loading ...
3. Basic operation of the keys
Camera Unit
PAIR button
Press and hold to pair with the parent unit or Hubble Wi-Fi®
Setup.
IMPORTANT: Download the full User Guide for complete instruction and button location, from the
Oricom website: oricom.com.au/support/.
4. Pairing Your Camera Unit with a Parent Unit
The unit works as an accessory camera with Oricom models:
OBH430, OBH500, OBH650P.
To re-register your Camera Unit (Baby Unit), or register a new Camera Unit (Baby Unit), follow
the procedures below:
1. Press the button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and the - (delete) / + (add) /
(view) / (scan) menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select + (add), and press the
button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up. Press the
+
UP button or
-
DOWN button to select the desired
Camera, and press the
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera location (with a *
against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Camera Unit until the Parent Unit finds the
camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
Loading ...
Loading ...
Loading ...