Loading ...
Loading ...
Loading ...
Aboutthefreshfoodcompartmentshelves. . eo ointcom
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Half-Width Shelves
One end of the shelf rests on a molded
side-wall support; a bracket on the other
end hooks into a track on the real"
cabinet wall.
TOremove,lift the shelf up at fl'ont, then
off the support and out of the track.
TOreplace, select desired shelf height.
With shelf front raised slightly, hook
the bracket's top lug into the track,
then lower the shelf onto the support.
NOTE:Theshelfto therightof thetrackis
designedtohookinto theright-handslot,
thesheffto theleft is designedto hook
intotheleft-handslot.
Full-Width Shelves
Some models have a steel wire sliding
shelf, a stationary tempered glass shelf or
two steel wire stationary shelves. These
shelves can be moved to another place
in the fl'esh food compartment.
The ffdl-width sliding shelf has stop-locks.
When placed correctly on the shelf
supports, the shelf will stop before coming
completely out of the refrigerator and will
not tilt when you place food on it or
remove food from it.
Toremovethefull-width shelves,lift the
rear of the shelf and pull forward.
Toremovea full-width shelf when thefresh
foodcompartmentdoorcannotbe opened
fully,lift the rear of"the shelf, pull
forward and down, tilt the shelf and
take it out.
5
Loading ...
Loading ...
Loading ...