Loading ...
Loading ...
Loading ...
Installation Instructions
IRII REVERSING THE DOOR SWING (CONT.)
[] REHANGING THE DOORS
6.1 Rehang the fresh food door
6.1.1 Lower the fresh food door onto the
bottom hinge pin. Be sure the washer
is in place on the pin.
Plastic
Washer
6
Washer Bracket
Bracket
Modelswith ahingebracket Modelswith a hingebracket
that has2screwholes, that has4screwholes.
[]REHANGING THE DOORS (CONT.)
6.2 Rehang the freezer door
6.2.1 Lower the fi'eezer door onto tile center
hinge pin. Be sure the washer and spacer
are in place on the pin.
CenterHingePin,
PlasticWasher
andSpacer
6.1.2 Insert the pin on the center hinge into the
socket in the top of the door. Place the
spaces; then the washer, on the hinge pin.
NOTE: The center hinge must he turned over
as shown when mounted on the left side.
HingePin
PlasticWasher
andSpacer
6.1.3 Tilt the door toward the cabinet. As the door is
brought into position, slide the hinge under the
head of the screw which earlier had been partly
driven into the outermost hole. Insert the
remaining screw, then tighten both screws
securely.
6.2.2 Tilt the door toward the cabinet, lifting the top
hinge so the pin fits into the socket on the top
of the door.
6.2.3 Make sure the door is slightly above the top of
the cabinet and the gap between the doors is
even across the fi'ont. Tighten the top hinge
screws. Do not overtighten these screws--
tighten them until they are just snug, then turn
them another one-half turn.
22
Loading ...
Loading ...
Loading ...