Loading ...
Loading ...
Loading ...
TROUBLESHOOTING47
Before Calling For Service (conf.}
Problem Solutions
The display • MORE TIME button pressed. • This display indicates that the steam option has been set
shows b _ _ for a" _ _ _ "item such as a comforter.
Press the LESSTIME button to reduce the indicated load
size.
CHECK FILTER . Lint filter is almost clogged or • Pause the drying cycle and clean the lint filter,
light is on full,
during the
drying cycle
FLOW SENSETM
indicator
shows four
bars during the
drying cycle
or the display
shows "d 80"
after drying,
The display
shows "d go",
"dgS"
. Ductwork is too long or has too
many turns/restrictions.
. Significant blockage of the
ductwork clue to lint buildup or
debris,
.The appliance has detected a
restriction in the external dryer
venting.
• The duct work is about 90%-
95% blocked.("dgo" or"d95" error
code displayed 2 hours only)
• House exhaust system blocked.
• Install a shorter or straighter duct run, See the Installation
Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times may
be longer.
• If exhaust restrictions are sensed bythe FLOW SENSETM
system, the indicator will remain on for two hours after
the end of the cycle. Opening the door or pressing the
POWER button will turn offthe display,
• Do not use the dryer until the exhaust system has
been cleaned and/or repaired, Using the dryer with a
severely restricted exhaust is dangerous and could result
in a fire or other property damage.
• Check the outside dryer vent while the dryer is operating
to make sure there is strong airflow,
. If the exhaust system is extremely long, have it repaired or
rerouted,
• Keep the area around the dryer clean and free of clutter.
• Check vent hood for damage or lint clogging,
• Make sure the area around the vent hood is clear.
Loading ...
Loading ...
Loading ...