Loading ...
Loading ...
Loading ...
VFI33 Vent Free Gas Fireplace System
20307670
33
Locate the blower control by opening control access door.
The variable controlled thermostat blower is located to the
right of heater controls. .
In the OFF position, the blower will not operate; however,
the heater can be operated without the blower being ON.
In the ON (AUTO) position, the blower will start when the
thermostat senses a suffi cient increase in fi rebox tem-
perature.
BLOWER OPERATION
OPERATING INSTRUCTIONS
MATCH LIGHTING INSTRUCTIONS
1. Remove any items necessary for easy access to the pilot (for example: logs, screens, etc.).
2. Follow appropriate lighting instructions found previously. Instead of pushing and releasing the piezo
button, light a match and hold the fl ame to the end of the pilot and ignite the pilot.
3. After control knob has been released and pilot stays lit, reinstall any items that were removed for pilot
access.
4. Call a qualifi ed service technician for repair or replacement of the piezo ignitor.
Figure 49 -
Location of Blower Control
NOTE: Your gas logs and blower will not turn on and off
at the same time. The gas logs may burn several minutes
before blower turns on. The blower will continue to run for
several minutes after the fl ames have turned off.
Blower Control
Loading ...
Loading ...
Loading ...