Loading ...
Loading ...
Loading ...
Aboutthetemperaturecontrols. GEAppliances.com
J
I
The temperature controls are preset in the factory at 37°1:for the
refrigerator compartment and O°Ffor the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
TOchange the temperature, press and release the
WARMER or COLDER pad. The SErlight will come
on and the display will show the set temperature.
To change the temperature, tap either the
WARMER or COLDERpad until the desired
temperature is displayed. Refrigerator temperatures
can be adjusted between 34°F and 44°F and the
freezer temperatures can be adjusted between
4i°F and +6°F.
Once tile desired temperature has been set,
the temperature display will return to tile actual
refrigerator and freezer temperatures after 5
seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours 1or the
refrigerator to reach tlle temperature you have set.
To turn the cooling system off, tap the WARMER pad
for either the refrigerator or the freezer until the
display shows OFF. TOturn the unit back on, press the
COLDER pad for either the refrigerator or freezm:
The SETlight will illuminate on the side you
selected. Then press the COLDER pad agMn (on the
side where the SErlight is illuminated) and it will
go to the preset points of O°Elor the freezer and
37°F1br the reliigeraton Setting either or both
controls m 0FFstups cooling in both tlle freezer
and refrigerator compartments, but does not shut
off electrical power to the refrigerator.
PerformanceAir FlowSystem
The Performance Air-Flow System is designed to
maximize temperature control in the refrigerator
and freezer compartments. This unique special
feature consists of the Air Tower along the back
wall of din refrigerator and the Air Tunnel on tlle
tx_ttom portion of tlle freezer rear wall. Placing food
in front of tlle louvers on these components will not
affect performance. Aithough the Air Tower and
the Air Tunnel can be removed, doing so Mll affect
temperature performance. (For removal
instructions, on4ine, 94 hours a day, contact us at
GEAppliances.com or call 800.GE.CARES. In
Canada, contact us at geappliances.ca or call
1.800.361.3400.)
5
Loading ...
Loading ...
Loading ...