iNSTALLATiON AND SERVICE MUST BE PERFORMED BY A QUALiFiED iNSTALLER.
iMPORTANT: SAVE FOR LOCAL ELECTRICAL iNSPECTOR'S USE.
READ AND SAVE THESE iNSTRUCTiONS FOR FUTURE REFERENCE.
For existing 29" (73.7 cm) cutout wide opening,
you must call the Service Center for optional
thinner side panels. Also you must prepare the
countertop edge as shown in the "Countertop
Preparation" section (see page 8).
These surfaces should be flat &
leveled (hatched area),
V2"Mi0
30" Min.
I (76.2 cm) Min.
30" Min. (see Note 3) _'
(76.2 cm) Min. (See Note 3) |
18" Min.
Min. (45.7 cm) Mir
Shave Raised
Edge To Clear
Space for
31 5/16"
(81cm)
Wide
Cooktop
1 1/2"Max.
(3.8 cm Max.)
Locate Cabinet Doors 1" (2.5
cm) Min. From Cutout Opening
G
I//2 MinJ
24" Min.
(61 cm) Min.
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20.3 - 43.2 cm) From Right
Cabinet and 2" to 4" (5.1-10.2 cm) From Floor
iM PO RTAN T:
Cabinet and
countertop width
should match the
cutout width.
E
E
Do not install the unit in the cabinet before reading next two pages.
A HEIGHT B.WIDTH " C. COOKTOP DI TOTAL DEPTH E. CUTOUT WIDTH*** HEIGHT
(UnderCooktop) " WIDT H . TQ FRONTO F , (Countertop , DEPTH , OFCOUNTERTOP
• " RANGE ' and cabinet) " "
355/8"(90.5cm) 30" 315/16" 285/16"(71,9cm) 30+_I/16" 213/4" (55,2 cm) Min. 36 5/8" (93 cm) Max.
36 518" (93 cm) (76,2 cm) (79.5 cm) (76,2_+0,15 cm) 22 118" (56,2 cm) Max 35 518" (90.5 cm) MJn.
24" (61 cm) Min. with
backguard
Printed in United States
P/N 318201611 (0604) Rev. D
English - pages 1-12
Espat_ol - paginas 13-24
Fran_ais - pages 25-36
Loading ...
Loading ...
Loading ...
