Loading ...
Loading ...
Loading ...
Controlfeaturesand styling vary by model.
SELECTCYCLE
To select a cycle, rotate the control dial to the desired setting.
When using an InteIIiDry cycle, the control dial should point
between "More Dry"and "Less Dry"for most loads.
Loads of larger or bulkier size may require the "More Dry" set-
ting to completely dry the load. The "Less Dry" setting is best
suitedfor lightweightfabrics or for leavingsome moisture inthe
clothing at the end of the cycle.
MORE DRY
INTELL]IDRY
NORMAL
LESS DRY
INTELLIDRY NORMAL
cycle is designed to dry most cot- MORE DRY
tons and linens.At the end of the
cycle, the load is cooled for OFF
approximately 10 minutes to COOL DOWN
reduce wrinkling. 1o,
WRINKLE
DAMP DRY 3(
INTELLIDRYPERMANENTPRESS FABRICS
WITHPRESSCAREcycle is designedto dry wrinklefree
cottons,syntheticfabrics,doubleknitsand permanentpressfab-
ricsautomatically.At the endof the cycle,the clothesare cooled
for approximately20minutesto reducewrinkling.Ifthe loadis not
removedfrom the dryer and PressCare On has beenselected,
the cycle willadvanceto PRESSCAREwhich providesaddition-
al unheatedtumblingtime.
LESS DRY
INTELLIDRY
PERMANENT PRESS
FABRICS
WITH PRESS CARE
PRESS CARE
OFF
50 70
TIME DRY/
AI R FLU FF
WRINKLE RELEASE wilI release
wrinkles from items that are clean and dry
but slightly wrinkled, such as from a crowd-
ed closet, packedsuitcase or from sitting in
the dryer too long after the end of the cycle.
It provides 10 minutes of heated tumbling
and 5 minutesof cool down tumblingwithout
heat.
DAMPDRYis designed to "partially"dry
items. It provides approximately20 minutes
of heated tumbling and 5 minutes of cool
down tumbling without heat.
TIME DRY/AIRFLUFFcyclecanbe
used to regulate the drying time. Use with
Air Fluff, Delicate, Mediumor Regular tem-
perature settings. For timed drying, turn the
control dialclockwise until the pointer points
to the propertime setting in the Time Dry/Air
Fluff cycle.
Using theAir Flufftemperatureset-
tingwillrequirea longerdryingtime.
The dial can be turned in either direction to select a cycle.Once started, the dial will not advance at a specific rate duringthe
IntelliDry cycles.At first the dial may not advanceat all.Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly.This is normal operation.
S
Loading ...
Loading ...
Loading ...