Loading ...
Loading ...
Loading ...
CYCLE GUIDE -- MANUAL CYCLES
Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models.
Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.
Time Adjust
Adjusting drying time on Timed Dry Cycles
_,,_,R_m_r,i_ When you select a Timed Dry Cycle,
the default time appears in the display.
Use the Time Adjust buttons to increase
or decrease the time in 1 minute
increments. Press and hold to change
the time in 5 minute increments.
The maximum dry time is 90 minutes.
Selecting the Temp
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Small loads and
sportswear
Any load
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive fabrics
Small to medium
loads
Quick Dry
Timed Dry
Touch
Up (for
non-steam
models)
High
Medium
Low
Extra Low
Air Only
High
Medium
Low
Extra Low
Air Only
High
Medium
Low
Extra Low
Air Only
13
40
20
Wrinkle Shield t
Wrinkle Shield t
Wrinkle Shield t
For small loads of 3-4 items
Use to dry items to a damp level for items thatdo not require an entire drying cycle. Select
a drying temperature based on the type of
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Use this setting to help smooth out wrinkles
from such items as garments packed in a
suitcase or garments wrinkled from being left
in the dryer.
Or Wrinkle Shield '_ with Steam (on some models). Wrinkle Shield TM with Steam is available only with High and Medium Temp settings.
CYCLE GUIDE- STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Mixed Loads
Shirts, blouses, and
slacks
Enhanced
Touch Up
Quick
Refresh
(on some
models)
High
Medium
High
22
12
Wrinkle Shield t
Static Reduce
Wrinkle Shield t
Static Reduce
©
Extended high-heat drying cycle intended to
help sanitize items such as bedding, towels,
and baby wear. This cycle is not recommended
for all fabrics. For best results, run cycle to
completion, do not interrupt.
Offers stepped drying starting with High heat,
followed by Medium heat for enhanced fabric
care and energy savings.
Or Wrinkle Shield _ with Steam (on some models). Wrinkle Shield TM with Steam is available only with High and Medium Temp settings.
Load Size Recommendations
For best results, follow the load size recommendations noted for
each cycle.
Q mall load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
_ IVledium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Loading ...
Loading ...
Loading ...