Loading ...
Loading ...
Loading ...
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
To remove the oven door:
,
,
,
,
,
Open oven door completely, horizontal with floor (See
Figure 7).
Pull the door hinge locks on both left and right door
hinges down from the oven frame completely toward
the oven door (See Figure 8). A tool such as a small
flat-blade screwdriver may be required.
Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (See Figure 9).
Close the door to approximately 10 degrees from the
door frame (See Figure 9).
Lift the oven door hinge arms over the roller pins
located on each side of the oven frame (See Figure 9).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (See Figure 9).
,
Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (See
Figure 9 and Figure 10). The hook of the hinge arms
must be fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
Figure 7).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the
locked position (See Figure 8).
5. Close the oven door.
Oven door
hinge
locations
(
Figure 7: Door hinge location
Figure 8: Door hinge locks
oven
door
Figure 9: Holding door for removal
Special Door Care Instructions - Most oven doors contain
glass that can break. Do not close the oven door until all
the oven racks are fully in place. Do not hit the glass with
pots, pans, or any other object. Scratching, hitting, jarring,
or stressing the glass may weaken its structure causing
an increased risk of breakage at a later time.
roller
pin
hinge
arm
Figure 10:
roller pin
/
/
Replacement and location of hinge arm and
Loading ...
Loading ...
Loading ...