Loading ...
Loading ...
Loading ...
Review this chart to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed at a Sears
service center.
iLWARNING
Disconnect electrical supply before performing maintenance to the vacuum
cleaner, Failure to do so could result in electrical shock or personal injury,
Vacuum Cleanerwon't 1,
start. 2,
3.
Poorjob of dirt 1.
pick-up, 2,
3.
4.
5.
6.
7.
8.
9,
10.
Vacuumcleaner starts but 1.
cuts off. 2.
3,
Power-Mate®will not 1,
runwhen attached.
2,
3,
4.
5,
Vacuum cleanerpicksup 1,
moveable rugs-or- 2,
Power-Mate=pushes
too hard.
Lightwon't work, 1,
Cordwon't rewind, 1.
2.
Vacuumcleaner leaves 1.
marks on carpet,
Unpluggedat wall outlet,
Tripped circuit breaker/blownfuse
at household servicepanel.
Loose hoseelectricalconnections.
Fullor cloggeddust bag.
Clogged airflowpassages.
Dirtyfilters.
Wrong pile height setting.
Open suction control
Holein hose.
Worn Power-Mate=agitator,
Worn or broken belt.
Dirtyagitator or endcaps.
Canister hood open.
Hoseor hoodelectricalconnections.
Trippedoverload protectorin
Power-Mate'.
Trippedthermalprotector
incanister.
Power-Mate"connections
unplugged.
Worn or broken belt.
Dirtyagitator or endcaps.
Trippedoverload protectorin
Power-Mate"
ONIOFF Switchisnot in
CARPETpositon.
Wrong pile height setting.
Suction toostrong.
1. Plug infirmly, pushON/OFFswitchto ON.
2. Reset circuitbreakeror repiaca fuse.
3. Reconnecthoseends.
1. Change bag.
2. Clear airflowpassages.
3. Change filters.
4. Adjust setting.
5. Adjust control.
6. Replace hose.
7, Change agitator.
8 & 9. See BELTCHANGINGAND AGITATOR
CLEANING.
10. Closeand latch hood.
1.
2.
3,
1,
2&3.
4,
Checkconnections,reconnect hoseends,
Removeany items thatmay be caught
or jammed,then reset. Ifvacuum cleaner
starts and stops again, clean agitatorand
end caps,then reset.
Resetthermal protector.
Plug infirmly.
See BELTCHANGINGAND AGITATOR
CLEANING.
Removeanyitemsthatmay becaught
or jammed,thenreset. Ifvacuumcleaner
startsand stops again,cleanagitatorand
end caps,thenreset.
5. Push ON/OFF Switchto CARPET
position.
1. Adjust setting.
2. Opensuctioncontrol.
Burnedout lightbulb. 1. Change lightbulb.
Dirty powercord. 1. Cleanthe powercord.
Cordjammed. 2. Pull out cord and rewind.
Wrongvacuuming pattern. 1. See VACUUMINGTIPS.
18
Loading ...
Loading ...
Loading ...