Loading ...
Loading ...
Loading ...
5
FILLING
WARNING: Disconnect power before filling, cleaning or servicing unit. Keep grille dry
at all times.
WARNING: To reduce the risk of fire or shock hazard, DO NOT pour or spill water into
control or motor area. If controls get wet, let them dry completely and have unit
checked by authorized service personnel before plugging in
NOTE: Fill unit with cool, fresh (preferably unsoftened) water. If you only have softened water
available in your home, you can use it, but mineral buildup will occur more quickly.
NOTE: On initial fill up, it may take approximately 30 minutes for the wicks to become
fully saturated.
CAUTION: Use only EPA Registered Bacteriostat. Under no circumstances should
you use Water Treatment products intended for Rotobelt or Ultrasonic
humidifiers.
We recommend using AIRCARE
®
or Essick Air
®
Bacteriostat Treatment P/N 1970
when you refill the water reservoir to eliminate bacterial growth. Add bacteriostat
according to the instructions on the bottle. Call 1-800-547-3888 to order.
NOTE: The humidifier contains water bottles. The weight of the bottles in the front of
the cabinet may cause the front casters to sink deeper into the carpet. If this happens,
the water level will be higher towards the front of the humidifier, and lower towards the
back. The water level float (located at the rear of the cabinet) may not sense the water
so the flashing “F” will be displayed and the unit will not energize. If this happens, the
unit will need to be leveled in order for the humidifier to be energized. To level the
humidifier, place the included caster pads under the front two casters of the humidifier
only.
1. Open the pivoting lid of the humidifier.
Remove the water bottles by lifting them
straight up and out of the cabinet.
Notice the water bottles are designed as
right and left hand units. When refilling the
bottles ensure correct placement for proper
function.
The water bottles should rest in the front of
the cabinet. Each “Side-Fill Cap” must be
facing the rear of the unit.
Each water bottle is designed with a
“Side-Fill Cap” and bottom valve cap.
Before filling each bottle check that the
bottle valve cap is on securely.
NOTE: A fill hose, P/N 4400, that attaches to a
faucet can be purchased by calling1-800-547-3888.
Loading ...
Loading ...
Loading ...