Loading ...
Loading ...
Loading ...
Reattaching the Freezer Door
1) Reattach a phillips screw (@_)and two hex head
screws (@)to the hinge.
2) Place the hole in the bottom of the door (@)
over the hinge (@).
J
3) Insert the upper hinge shaft (®) into the hole (@).After levelling between the hinge brackets (®).
Reattach and close the latch (@)along the arrow.
Connect the water tube (@)and the wires (@).Then, place the water tube(@) on the hanger (@)
NOTE
Be sure to insert the water tube and push to the end. ..................
4) Put the connector (@) in the guide (@) of the
connector-cover and close it.
5) Put the front part of the upper hinge cover (@)
on the front part of the upper hinge (@) and
reattach it from the front of the upper hinge
cover first.
6) Reattach a phillips screw to the hinge cover (@).
29
Loading ...
Loading ...
Loading ...