Loading ...
Loading ...
Loading ...
42
embroIdery preparatIon
ATTACHING THE EMBROIDERY FOOT
CONNECTING THE EMBROIDERY UNIT
There is a covered socket (A) behind the machine. The cover
will open automatically when connecting the embroidery unit.
1. Turn the machine off before connecting the embroidery unit.
2. Slide the embroidery unit onto the arm of the machine until
it plugs rmly into the socket.
3. If needed, use the level adjusting feet so that the machine
and embroidery unit are even with one another.
to remove the embroIdery unIt
Remove the hoop from the machine. (See Page 46)
1. To store the embroidery unit into the box, move the carriage
to park position by selecting Park Position in the Hoop
Option. (See page 50)
2. Turn off the machine.
3. Pull the lever (B) at the left, underneath the embroidery unit
and slide the unit to the left to remove it.
The cover of the socket closes automatically.
4. Store the embroidery unit in the original packing material.
1. Remove the presser foot and holder.
(See page 8)
Exchange the needle to an embroidery needle (a).
2. The arm (b) of Embroidery Foot should ride above the shaft
(c) of the needle clamp.
3. Slide the attaching head from your left to right so that it is
tted into the presser bar.
For easier access, lower the needle slightly by turning the
hand wheel toward you.
4. Tighten the presser foot screw securely.
Your sewing machine can convert to embroidery mode easily
by attaching the embroidery unit as follows.
b
a
c
MESSAGES AT START UP
When you turn the machine on, a series of messages will
appear on the screen.
a. If the needle is not in its highest position, this message
will appear. Turn the hand wheel toward you to raise the
needle to its highest position and then press the “
✓
” button.
b. If this message appears, remove the hoop (if attached),
clear the embroidery area and press the “
✓
” button.
c. If presser foot is lowered, this message will appear. Raise
the presser foot lifter and press the “
✓
” button.
When the messages a-c have cleared the screen, the
carriage will move to start point.
d. The Home Screen will appear.
Loading ...
Loading ...
Loading ...