IMPRESSA Z9 One Touch TFT Instructions for Use
The Instructions for use has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage of safety
aspects.
2
Table of contents
Your IMPRESSA Z9 One Touch TFT
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet ....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container ...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................14
Filling the water tank ...................................................................................................................................15
Connecting milk ...........................................................................................................................................15
2 Preparation 16
Ways of preparing a beverage ...................................................................................................................16
Espresso and coffee .....................................................................................................................................17
Preparing two speciality coffees ................................................................................................................17
Preparation in ‘coffee à la carte’ mode.....................................................................................................18
Special coffee ................................................................................................................................................19
Latte macchiato, cappuccino .....................................................................................................................19
Warm milk and milk foam .........................................................................................................................20
Ground coffee ..............................................................................................................................................20
Permanently setting amounts for the cup size ......................................................................................21
Hot water ......................................................................................................................................................23
3 Daily operation 24
Switching on ................................................................................................................................................24
Daily maintenance ......................................................................................................................................24
Switching off ................................................................................................................................................25
4 Permanent settings in programming mode 26
Product settings ..........................................................................................................................................27
Adding products to the start screen ........................................................................................................28
Renaming a product ...................................................................................................................................29
Energy-saving mode ..................................................................................................................................30
Automatic switch-off ...................................................................................................................................31
Language ......................................................................................................................................................32
Restore factory settings .............................................................................................................................32
Rinses ............................................................................................................................................................33
Setting the water hardness .......................................................................................................................34
Unit for amount of water ...........................................................................................................................35
Display settings ...........................................................................................................................................35
Querying information ................................................................................................................................36
3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your IMPRESSA.
‘Espresso’ Display
Symbol description
5 Maintenance 37
Rinsing the machine ................................................................................................................................... 37
Rinsing the cappuccino frother ................................................................................................................38
Cleaning the cappuccino frother ..............................................................................................................38
Dismantling and rinsing the cappuccino frother ..................................................................................39
Inserting and activating the filter .............................................................................................................40
Changing the filter .......................................................................................................................................41
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................44
Cleaning the bean container .....................................................................................................................46
Descaling the water tank ...........................................................................................................................46
6 Display messages 47
7 Troubleshooting 49
8 Transport and environmentally friendly disposal 51
Transport/ Emptying the system ..............................................................................................................51
Disposal ..........................................................................................................................................................51
9 Technical data 52
10 Index 53
11 JURA contact details/ Legal information 56
4
Control elements
Control elements
4
11
1
2
7
6
5
3
9
12
14
13
8
10
1 Bean container cover
2 Water tank cover
3 Water tank
4 Power switch and mains cable (side of
machine)
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
8 Grinder adjustment switch
9 Bean container with aroma preservation
cover
10 Filler funnel cover
11 Filler funnel for ground coffee
12 Hot-water spout
13 Height- and width-adjustable coffee spout
14 Cup grille
5
Control elements
31 2
4
5
Top of the machine
1 Q On/Off button
2 g Rotary Switch
3 O P button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)
6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi-
bility for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
U
Never use a machine which is damaged or has
a defective mains cable.
U
In the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
U
If the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
U
Make sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
U
Be careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J
7
Important information
U
Never open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
U
To completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
the cappuccino frother.
U
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles
provided.
U
Ensure that the cappuccino frother is correctly
fitted and clean. If incorrectly fitted or if they
become blocked, the cappuccino frother or its
parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
U
Never allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
U
Protect the IMPRESSA from environmental
influences such as rain, frost and direct sun-
light.
U
Do not immerse the IMPRESSA, mains cable or
connections in water.
8
Important information
U
Do not put the IMPRESSA or any individual
parts in the dishwasher.
U
Switch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.
U
Only connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your IMPRESSA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
U
Please only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
IMPRESSA.
U
Do not use any coffee beans treated with addi-
tives or caramelised coffee beans.
U
Only fill the water tank with fresh, cold water.
U
Switch the machine off at the power switch if
you are going to be absent for a longer period
of time.
U
Children may not carry out cleaning or main-
tenance without supervision by a responsible
person.
U
Do not allow children to play with the machine.
U
Keep children under 8 years of age away from
the machine and/or supervise them con-
stantly.
U
Children aged 8 and over may only use the
machine without supervision if they have been
instructed in how to use it safely. Children
must be aware of and understand the possible
dangers caused by misusing the machine.
9
Important information
People, including children, who
U
do not have the physical, sensory or mental
capabilities to use the machine safely or
U
are inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Blue filter car-
tridge:
U
Filter cartridges should be kept out of the
reach of children.
U
Store filter cartridges in a dry place in the
sealed packaging.
U
Protect cartridges from heat and direct sun-
light.
U
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
U
Place the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
U
Choose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
T Open the bean container cover and remove the aroma pres-
ervation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Blue fil-
ter cartridge. If the water hardness is 10°dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use
J
WARNING
11
1 Preparing and using for the first time
Precondition:The bean container has been filled.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the left-
hand side of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Use filter’
E Now decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
First-time use with filter
cartridge activation
CAUTION
12
1 Preparing and using for the first time
T Place a receptacle (at least 500ml) under the cappuccino
frother.
T Press the
‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchk to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml.
‘Filter rinsing complete’
‘System is filling.’
, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’
, the Rotary Switch lights up.
T Empty the receptacle and place it under the coffee spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically.
‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’ ‘16°dH’
First-time use without filter
cartridge activation
CAUTION
13
1 Preparing and using for the first time
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
g T Turn the Rotary Switch to change the water hardness set-
ting, e.g. to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank.’
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’
, the Rotary Switch lights up.
T Place a receptacle under the coffee spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically.
‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Determining the water
hardness
14
1 Preparing and using for the first time
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition:
‘Please select product:’ is displayed.
T Open the bean container cover.
T Place a cup under the coffee spout.
T Press the
‘Espresso’ button.
The grinder starts up.
‘Espresso’ is displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the bean container cover.
Adjusting the grinder
CAUTION
15
1 Preparing and using for the first time
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8°C. We would therefore recom-
mend using a milk cooler or a vacuum milk container.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother. Use the short pipe for
a milk container and the long pipe for a milk carton.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton (Figure: JURA 0.6 litre stainless
steel vacuum milk container).
Filling the water tank
CAUTION
Connecting milk
16
2 Preparation
2 Preparation
E While a product is being prepared, you can stop preparation
at any time. Just press any button.
E During preparation, you can change the preset amounts by
turning the Rotary Switch g.
E You can follow the current status of preparation on the display.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The IMPRESSA offers various ways of preparing a speciality coffee,
milk or hot water:
U
At the touch of a button: Simply press the corresponding
preparation button for the product shown on the display
(start screen) that you want.
The following products are displayed as standard on the start
screen:
U
‘Espresso’
U
‘Coffee’
U
‘Cappuccino’
U
‘Latte macchiato’
U
‘Hot water’
U
‘1 portion milk’
U
Using the product selector (Rotary Selection): Only some of
the products you can prepare are shown on the start screen.
As soon as you turn the Rotary Switch, more products are dis-
played in a product selector.
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
Ways of preparing a
beverage
17
2 Preparation
The following additional products are shown in the product
selector:
U
‘Ristretto’
U
‘2 ristretti’
U
‘2 espressi’
U
‘2 coffees’
U
‘Special coffee’
U
In coffee à la carte mode: Briefly press the Rotary Switch once
to enter ‘coffee à la carte’ mode. In this mode you can select
the coffee strength and amounts before preparation.
E The machine will exit from the product selector and ‘coffee à
la carte’ mode automatically after 5 seconds if no preparation
is started.
E You can assign your favourite drinks to the multi-function but-
tons and the product selector. (see Chapter 4 ‘Permanent set-
tings in programming mode – Adding products to the start
screen’).
‘Espresso’ and ‘Coffee’ are prepared at the touch of a button follow-
ing this model.
Example:Proceed as follows to prepare one coffee at the touch of a
button.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the coffee spout.
T Press the
‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Two ristretti, two espressi or two coffees can always be prepared fol-
lowing the same model: Press the preparation button you want
twice within two seconds or select the desired double product in
the product selector.
Espresso and coffee
Preparing two speciality
coffees
18
2 Preparation
Briefly press the Rotary Switch once to enter ‘coffee à la carte’ mode.
In this mode you can select the coffee strength and amounts before
preparation.
E The settings made in ‘coffee à la carte’ mode are one-off set-
tings and are not stored.
E The machine will exit ‘coffee à la carte’ mode automatically
after 5 seconds if no preparation is started.
E You cannot prepare double products in ‘coffee à la carte’
mode.
Example:Proceed as follows to prepare an espresso in ‘coffee à la
carte’ mode.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the coffee spout.
k T Briefly press the Rotary Switch to enter ‘coffee à la carte’
mode.
‘Café àla carte’
The products you can prepare in this mode are displayed.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the
‘Espresso’ button.
‘Coffee strength’ appears on the display.
g T Turn the Rotary Switch to adjust the coffee strength.
k T Press the Rotary Switch to confirm the setting.
‘Volume’/ ‘45ml’ appears on the display.
g T Turn the Rotary Switch to adjust the fill volume.
k T Press the Rotary Switch to confirm the setting.
Preparation starts. The espresso is prepared using the
selected settings.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Preparation in ‘coffee à la
carte’ mode
19
2 Preparation
Example:Proceed as follows to prepare a special coffee using the
product selector.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the cappuccino frother.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the
‘Special coffee’ product is in
focus.
k T Press the Rotary Switch to start preparation.
Preparation starts. The preset amount of water for special
coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato at the
touch of a button.
Precondition:
‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T Place a glass under the cappuccino frother (Figure: JURA
0.6 litre stainless steel vacuum milk container).
E Ensure that the level of the milk is no higher than the milk
pipe connection on the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Special coffee
Latte macchiato,
cappuccino
20
2 Preparation
Coffee preparation starts. The preset amount of water for
espresso flows into the glass.
Preparation stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Example:Proceed as follows to prepare hot milk at the touch of a
button.
Precondition:
‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
position z.
E If you want to prepare milk foam, turn the setting wheel of
the cappuccino frother to the Milk Foam position ü.
T Press the
‘1 portion milk’ button.
The hot milk is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
Warm milk and milk
foam
Ground coffee
21
2 Preparation
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee.’ is displayed and
the IMPRESSA stops the operation.
E The desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example:Proceed as follows to prepare one coffee using ground
coffee.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the coffee spout.
T Open the bean container cover.
T Open the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
‘Please select product:’
T Press the ‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
It is easy to permanently adjust the amount of water and milk for all
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
The permanent settings for adapting the amounts to the cup size
for all products follow this model.
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
‘Please select product:’ is displayed.
Permanently setting
amounts for the cup size
22
2 Preparation
T Place a cup under the coffee spout.
T Press and hold the
‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
T Hold the
‘Coffee’ button down until ‘Enough coffee? Press
button.’
appears.
T Release the
‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
E You can alter this setting at any time by repeating the above
procedure.
E The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch k until
‘Enough coffee?
Press button.’
appears.
E You can also permanently set the amount for all speciality cof-
fees, milk and hot water in programming mode (see Chap-
ter 4 ‘Permanent settings in programming mode – Product
settings’).
23
2 Preparation
The following temperatures can be selected for preparing hot water:
‘Normal’, ‘High’, ‘Low’.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water.
Precondition:
‘Please select product:’ is displayed.
T Place a cup under the hot-water spout.
T Press the
‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E By pressing the Rotary Switch g (within approximately
2 seconds) you can set the temperature to your individual
preference. This setting is not saved.
The preset amount of water flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Hot water
J
CAUTION
24
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
When the IMPRESSA is switched on, it automatically prompts you
to perform the switch-on rinse. Start the switch-on rinse by pressing
the Rotary Switchk. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically.
(see Chapter 4 ‘Permanent settings in programming mode –
Rinses’).
Precondition:Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
‘Welcome to JURA’ appears on the display.
‘Machine is heating.’
‘Press the Rotary Switch.’
, the Rotary Switch lights up.
k T Press the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically.
‘Please select product:’ appears on
the display.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Clean the cappuccino frother (see Chapter 5 ‘Mainte-
nance – Cleaning the cappuccino frother’).
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the cappuccino
frother’).
Switching on
Daily maintenance
25
3 Daily operation
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 6 months). Replacement
pipes are available from specialised dealers.
When you switch your IMPRESSA off, the spouts used to prepare a
speciality coffee are rinsed.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
Q T Press the On/Off button.
‘Machine is rinsing.’, the spouts used to prepare a speciality
coffee or milk are rinsed. The operation stops automatically.
Your IMPRESSA is switched off.
E When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.01W of standby energy.
The machine can be completely disconnected from the power
supply using the power switch.
Switching off
26
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Programme item Sub-item Explanation
‘Maintenance
status (1/7)’
‘Clean’
,
‘Descale’ (only if filter is
not activated),
‘Change the filter’ (only if
filter is activated),
‘Clean the milk system’
T Start the required maintenance programme
here.
‘Maintenance
status (2/7)’
‘Rinse the coffee system’,
‘Rinse the milk system’
T Start the required rinse here.
‘Product settings
(3/7)’
‘Programming’,
‘Classic-library’
T Select your settings for speciality coffees, milk
and hot water.
T Change the products assigned to the multi-
function buttons and product selector.
‘Machine settings
(4/7)’
‘Choose language’,
‘Switch off after’,
‘Save energy’,
‘Factory setting’
T Select your language.
T Set the time after which the IMPRESSA should
switch off automatically.
T Select an energy-saving mode.
T Reset the machine or the permanently set
values of all products to the factory settings.
‘Machine settings
(5/7)’
‘Units’,
‘Display’,
‘Colour scheme’
T Select the unit for the amount of water.
T Change the display settings.
‘Maintenance
settings(6/7)’
‘Filter’,
‘Water hardness’ (only if
filter is not activated),
‘Switch-on rinse’,
‘Rinse the milk system’
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue filter
cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on rinse
and milk system rinse.
‘Information (7/7)’ ‘Product counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and view
the number of maintenance programmes
performed.
27
4 Permanent settings in programming mode
In the programme item ‘Product settings(3/7)’/ ‘Programming’ you
can make individual settings for all speciality coffees, milk and hot
water. The following permanent settings can be made:
Product Temperature Coffee strength Amount
Ristretto,
espresso,
coffee,
special coffee
‘High’,
‘Normal’,
‘Low’
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Volume:
‘25ml’–‘240ml’
Two ristretti,
two espressi,
two coffees
‘High’,
‘Normal’,
‘Low’
– Volume:
‘25ml’–‘240ml’ (per cup)
Latte macchiato,
cappuccino
‘High’,
‘Normal’,
‘Low’
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Amount of milk:
‘3sec.’–‘120sec.’
Interval: ‘0sec.’–‘120sec.’
Volume: ‘25ml’–‘240ml’
Portion of milk – – Amount of milk: ‘3sec.’–‘120sec.’
Hot water ‘High’,
‘Normal’,
‘Low’
– Volume: ‘25ml’–‘450ml’
Example:Proceed as follows to change the amount of milk for a
latte macchiato from
‘16sec.’ to ‘20sec.’, the interval from ‘30sec.’
to
‘40sec.’ and the amount of water from ‘45ml’ to ‘40ml’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Product
settings(3/7)’
is displayed.
T Press the
‘Programming’ button.
‘Programming’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
‘Latte macchiato’ button.
T Press the
‘Amount of milk’ button.
Product settings
28
4 Permanent settings in programming mode
g T Turn the Rotary Switch to change the setting for the amount
of milk to
‘20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
g T Turn the Rotary Switch to change the setting for the interval
to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Volume’ button.
g T Turn the Rotary Switch to change the setting for the amount
of water to
‘40ml’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings(3/7)’/ ‘Classic-library’ you
will find all the products stored as standard in your IMPRESSA. You
can move any of these products to your preferred position on the
start screen and make it one of your favourites.
You can also change the products shown in the product selector. To
do this, go to the programme item
‘Product settings(3/7)’/ ‘Pro-
gramming’
and press the ‘Remove from product selector’ button to
delete a product or products. In the programme item
‘Product set-
tings(3/7)’
/ ‘Classic-library’, press the ‘Add to product selector’ but-
ton to add a product or products again.
Example:The
‘2 espressi’ product appears in the bottom right-hand
corner of the start screen.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Product
settings(3/7)’
is displayed.
Adding products to the
start screen
29
4 Permanent settings in programming mode
T Press the ‘Classic-library’ button.
‘Classic-library’
E Next select the button of the product you want to move to the
start screen. No product is prepared at this point.
E Select the ‘No product’ button if you want to leave a position
on the start screen empty.
T Press the
‘2 espressi’ button.
T Press the
‘Next’ button.
T Press the
‘Add to favourites’ button.
‘Select position’
T Press the button at the bottom right.
‘Do you want to replace the current product?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘2 espressi’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings(3/7)’/ ‘Programming’ you
can rename all the products stored on the start screen or the prod-
uct selector.
Example: Proceed as follows to change the product name from
‘Coffee’ to ‘My coffee’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Product
settings(3/7)’
is displayed.
T Press the
‘Programming’ button.
‘Programming’
T Press the ‘Coffee’ button.
T Press the
‘Next’ button.
T Press the
‘Product name’ button.
‘ABC’...‘Я’
g T Turn the Rotary Switch until the letter ‘M’ is highlighted.
Renaming a product
30
4 Permanent settings in programming mode
k T Press the Rotary Switch to confirm the letter ‘M’.
T Press the
‘abc’ button to change to lower case.
g T Turn the Rotary Switch until the letter
‘y’ is highlighted.
k T Press the Rotary Switch to confirm the letter
‘y’.
T Continue until
‘My coffee’ is displayed.
T Press the
‘Save’ button to confirm the product name.
‘Saved’ appears briefly on the display.
‘My coffee’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings(4/7)’/ ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Save Level 1’
U
After switching on, your IMPRESSA is only ready for use for
speciality coffees and hot water. Before you can prepare a
speciality coffee with milk, the machine must heat up.
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
‘Energy Save’ is dis-
played.
U
‘Save Level 2’
U
After switching on, your IMPRESSA is ready for use for all
speciality coffees with and without milk, as well as hot water.
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
‘Energy Save’ is dis-
played.
U
‘Save No’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
Example:Proceed as follows to change the energy-saving mode
from
‘Save Level 1’ to ‘Save Level 2’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
Energy-saving mode
31
4 Permanent settings in programming mode
T Press the ‘Save energy’ button.
‘Save energy’
T Press the ‘Save Level 2’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(4/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time fol-
lowing the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes
or 1–15hours.
Example:Proceed as follows to change the switch-off time from
‘2hrs.’ to ‘1hrs.’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Switch off after’ button.
‘2hrs.’
g T Turn the Rotary Switch until ‘1hrs.’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(4/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
Automatic switch-off
32
4 Permanent settings in programming mode
In the programme item ‘Machine settings(4/7)’/ ‘Choose language’
you can select the language used by your IMPRESSA.
E If you choose the wrong language by mistake, you can easily
reset the machine to
‘Deutsch’: Press the P button to enter
programming mode. Use the Rotary Switch g to select pro-
gramme item ‘4/7’ and then press the top left-hand button.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen(4/7)’
O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
In the programme item ‘Machine settings(4/7)’/ ‘Factory setting’
you can reset various settings to their factory settings:
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Product’
U
The settings (amount of water, coffee strength, temperature
etc.) for any product can be reset individually to the factory
settings. The corresponding double product is also reset to
the factory settings at the same time.
U
‘Machine’
U
All user settings (apart from the ‘filter’ and ‘water hardness’)
are reset to the factory settings.
U
‘Empty system’
U
The system is emptied. Your IMPRESSA then switches off.
Language
Restore factory settings
33
4 Permanent settings in programming mode
Example:Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Product’ button.
T Press the
‘Espresso’ button.
‘Reset this product to the factory setting?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Maintenance settings(6/7)’ you can adjust
the following settings for the switch-on rinse and milk system rinse:
U
‘Switch-on rinse’/ ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’/ ‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’/ ‘Manual’
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’/ ‘Automatic’
U
Milk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a speciality coffee with milk.
Example:Proceed as follows to make the machine rinse the milk
system automatically after preparing a speciality coffee with milk.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Mainte-
nance settings(6/7)’
is displayed.
Rinses
34
4 Permanent settings in programming mode
T Press the ‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Automatic’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings(6/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
E If you are using the CLARIS Blue filter cartridge and have acti-
vated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Example:Proceed as follows to change the water hardness from
‘16°dH’ to ‘25°dH’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Mainte-
nance settings(6/7)’
is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
g T Turn the Rotary Switch until ‘25°dH’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings(6/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
Setting the water
hardness
35
4 Permanent settings in programming mode
In the programme item ‘Machine settings(5/7)’/ ‘Units’ you can
select the unit used for the amount of water.
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(5/7)’
is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(5/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings(5/7)’ you can make the
following settings:
U
‘Display’ (as percentages)
Change the brightness of the display.
U
‘Colour scheme’
U
Change the background of the display.
Example:Proceed as follows to change the background of the dis-
play.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(5/7)’
is displayed.
T Press the
‘Colour scheme’ button.
‘Colour scheme’
g T Turn the Rotary Switch to select a different background.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(5/7)’
Unit for amount of water
Display settings
36
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
E The set background is only displayed on the start screen.
In the programme item
‘Information (7/7)’ you can view the follow-
ing information.
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling, changing the filter etc.)
U
‘Version’: Software version
Example:Proceed as follows to view the number of coffees pre-
pared.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Informa-
tion (7/7)’
is displayed.
T Press the
‘Product counter’ button.
‘Product counter’
T T Press the ‘Next’ button until ‘Coffee’ and the number of pre-
pared coffees is displayed.
O T Press the P button to exit programming mode.
‘Please select product:’
Querying information
37
5 Maintenance
5 Maintenance
Your IMPRESSA has the following integrated maintenance pro-
grammes:
U
Rinsing the machine (‘Rinse the coffee system’)
U
Rinsing the cappuccino frother (‘Rinse the milk system’)
U
Cleaning the cappuccino frother (‘Clean the milk system’)
U
Changing the filter (‘Change the filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’) (only if filter is not acti-
vated)
E Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E Press the P button to view a list of the maintenance pro-
grammes (
‘Maintenance status(1/7)’). By referring to the bar
you can see which maintenance programme is due. When the
bar is completely filled with red, your IMPRESSA will prompt
you to perform the appropriate maintenance programme.
E Your IMPRESSA will not prompt you to clean the cappuccino
frother. In the interests of hygiene, you should clean the cap-
puccino frother daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition:
‘Please select product:’ is displayed.
T Place a receptacle under the coffee spout.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Mainte-
nance status(2/7)’
is displayed.
T Press the
‘Rinse the coffee system’ button.
‘Machine is rinsing.’, water flows out of the coffee spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
Rinsing the machine
38
5 Maintenance
After each milk preparation, the IMPRESSA prompts you to rinse the
milk system.
Precondition:
‘Rinse the milk system.’ is displayed and the Rotary
Switch lights up.
T Place a receptacle under the cappuccino frother.
k T Press the Rotary Switch.
‘Milk system is being rinsed.’, the cappuccino frother is
rinsed.
The rinse stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from specialised dealers.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
T Press the ‘Clean the milk system’ button.
‘Approximate duration 2 min.’
T Press the ‘Start’ button.
‘Use only original JURA maintenance products!’
T Press the ‘Start’ button again.
‘Cleaning agent for milk system.’
T Pour 250ml of fresh water into a receptacle and add one
capful of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foamü or Milkz position.
Rinsing the cappuccino
frother
Cleaning the cappuccino
frother
CAUTION
39
5 Maintenance
T Place another receptacle under the cappuccino frother.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, the cappuccino frother and
the milk pipe are cleaned.
‘Water for cleaning milk system.’
T Rinse the receptacle thoroughly, fill it with 250ml of fresh
water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the cappuc-
cino frother again.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, the cappuccino frother and
the milk pipe are rinsed with fresh water.
The operation stops automatically.
‘Please select product:’
appears on the display.
To make sure the cappuccino frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your IMPRESSA will not prompt you to
dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in JURA Cappuccino
Cleaner and then rinse them thoroughly.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach the frother to the connector.
Dismantling and rinsing
the cappuccino frother
40
5 Maintenance
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If you did not activate the filter cartridge
the first time you used the machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Mainte-
nance settings(6/7)’
is displayed.
T Press the
‘Filter’ button.
‘Use filter’
T Press the ‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’
T Remove and empty the water tank.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500ml) under the cappuccino
frother.
T Press the
‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the cappuccino
frother.
Inserting and activating
the filter
41
5 Maintenance
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchk to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml.
‘Please select product:’ appears on the display. The filter is
now activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E CLARIS filter cartridges are available from specialised dealers.
Precondition:
‘Change the filter’ is displayed and the P buttonlights
up.
O T Press the P button.
‘Maintenance status(1/7)’
T Press the ‘Change the filter’ button.
‘Approximate duration 2 min.’
T Press the ‘Start’ button.
‘Use only original JURA maintenance products!’
T Press the ‘Start’ button again.
‘Change filter.’
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge.
T Fit the filter extension on top of a new filter cartridge.
Changing the filter
42
5 Maintenance
T Insert the new filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500ml) under the cappuccino
frother.
T Press the
‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchk to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml.
‘Please select product:’ appears on the display.
After 220preparations or 80switch-on rinses, the IMPRESSA will
prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Cleaning the machine
CAUTION
43
5 Maintenance
Precondition:‘Clean machine.’ is displayed and the P buttonlights
up.
O T Press the P button.
‘Maintenance status(1/7)’
T Press the ‘Clean’ button.
‘Approximate duration 20 min.’
T Press the ‘Start’ button.
‘Use only original JURA maintenance products!’
T Press the ‘Start’ button again.
‘Empty coffee grounds container.’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows out of the coffee
spout.
The operation is interrupted,
‘Add cleaning tablet.’.
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows repeatedly out of
the coffee spout and the cappuccino frother.
The operation is interrupted,
‘Empty coffee grounds con-
tainer.’
.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Please select product:’ appears on the display. Cleaning is
now complete. Your IMPRESSA is once more ready for use.
44
5 Maintenance
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 45minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
Precondition:
‘Decalcify machine.’ is displayed and the P but-
tonlights up.
O T Press the P button.
‘Maintenance status(1/7)’
T Press the ‘Descale’ button.
‘Approximate duration 45 min.’
T Press the ‘Start’ button.
‘Use only original JURA maintenance products!’
T Press the ‘Start’ button again.
‘Empty drip tray.’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Pour descaling agent into water tank.’
T Remove and empty the water tank.
Descaling the machine
J
CAUTION
CAUTION
CAUTION
CAUTION
45
5 Maintenance
T Completely dissolve the contents of one blister (3JURA des-
caling tablets) in a receptacle holding 600ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
T Carefully pull the cappuccino frother down and off.
T Place one receptacle under the connector of the cappuccino
frother and another under the hot-water spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows repeatedly out of
the connector of the cappuccino frother and the hot-water
spout.
The operation is interrupted,
‘Empty drip tray.’.
T Empty both receptacles.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank.’
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
T Firmly attach the frother to the connector.
T Place a receptacle under the cappuccino frother, the coffee
spout and the hot-water spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows out of the hot-
water spout and the cappuccino frother.
‘Machine is heating.’
‘Machine is rinsing.’
, water flows out of the coffee spout.
The operation stops automatically,
‘Empty drip tray.’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Please select product:’ appears on the display. Descaling is
now complete. Your IMPRESSA is once more ready for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
46
5 Maintenance
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
‘Fill bean container.’ is displayed.
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the bean container cover and remove the aroma pres-
ervation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge, remove this.
T Descale the tank with a mild conventional descaling agent
in accordance with the manufacturer's instructions.
T Rinse out the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the
tank.
Cleaning the bean
container
Descaling the water tank
47
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank.’ The water tank is empty. You cannot
prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first
time – Filling the water tank’).
‘Empty coffee
grounds contai-
ner.’
The coffee grounds container is full.
You cannot prepare any products.
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation – Daily
maintenance’).
‘Coffee grounds
container not
fitted.’
The coffee grounds container is not
fitted. You cannot prepare any
products.
T Fit the coffee grounds container.
‘Empty drip tray.’ The drip tray is full. You cannot
prepare any products.
T Empty the drip tray.
T Clean and dry the metal contacts
on the back of the drip tray.
‘Drip tray not
fitted.’
The drip tray is not inserted correctly
or is not inserted at all. You cannot
prepare any products.
T Fit the drip tray.
‘Press the Rotary
Switch.’
The system must be filled with water
or the IMPRESSA is prompting you to
continue an interrupted maintenance
programme.
T Turn the Rotary Switch to
continue with the maintenance
programme or to fill the system.
‘Fill bean contai-
ner.’
The bean container is empty. You
cannot prepare any speciality coffees,
but you can prepare hot water and
milk.
T Fill the bean container (see
Chapter 1 ‘Preparing and using for
the first time – Filling the bean
container’).
‘Aroma preserva-
tion cover not
fitted.’
The aroma preservation cover is not
inserted correctly or is not inserted at
all. You cannot prepare any products.
T Fit the aroma preservation cover.
‘Not enough
ground coffee.’
There is insufficient ground coffee in
the machine; the IMPRESSA stops the
operation.
T The next time you prepare a
beverage, add more ground coffee
(see Chapter 2 ‘Preparation –
Ground coffee’).
‘Rinse the milk
system.’
The IMPRESSA is prompting you to
rinse the milk system.
TPress the Rotary Switch to start
rinsing the milk system.
48
6 Display messages
Message Cause/Result Action
‘Clean machine.’ or
‘Clean machine
now.’
The IMPRESSA is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).
‘Decalcify
machine.’
or
‘Descale machine
now.’
The IMPRESSA is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).
‘Change the filter’
or
‘Change filter
now.’
After 50litres of water have flowed
through the CLARIS Blue filter
cartridge or after two months, it will
cease to work.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5 ‘Mainte-
nance – Changing the filter’).
49
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
When preparing a latte
macchiato, the typical
three layers do not
form.
–
TTurn the setting wheel of the cappuccino
frother to the far right and the Milk Foam
positionü.
T Change the length of the interval to at
least 30 seconds in programming mode
(see Chapter 4 ‘Permanent settings in
programming mode – Product settings’).
Insufficient foam is
produced when the
milk is frothed or
milk sprays from the
cappuccino frother.
The cappuccino frother
is dirty.
T Clean the cappuccino frother (see
Chapter 5 ‘Maintenance – Cleaning the
cappuccino frother’).
T Dismantle and rinse the cappuccino
frother (see Chapter 5 ‘Maintenance – Dis-
mantling and rinsing the cappuccino
frother’).
TCheck that the air intake pipe is fitted on
the cappuccino frother.
TRinse or replace the air intake pipe. You
will find a replacement in the Welcome
Pack.
Coffee only comes
out in drips when it is
being prepared.
Coffee or ground coffee
has been ground too
finely and is blocking the
system. The same filter
cartridge may have been
used several times or
the water hardness set
incorrectly in the
programming mode.
T Put the grinder on a coarser setting or use
coarser ground coffee (see Chapter 1
‘Preparing and using for the first time –
Adjusting the grinder’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
Water hardness cannot
be adjusted.
The CLARIS Blue filter
cartridge is activated.
T Deactivate the filter cartridge in program-
ming mode.
‘Fill bean container.’ is
not displayed although
the bean container is
empty.
The bean monitor is
dirty.
T Clean the bean container (see Chapter 5
‘Maintenance – Cleaning the bean
container’).
50
7 Troubleshooting
Problem Cause/Result Action
‘Empty drip tray.’ is
always displayed.
The metal contacts of
the drip tray are dirty or
wet.
T Clean and dry the metal contacts on the
back of the drip tray.
‘Fill water tank.’ is
displayed although the
water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).
Little or no water or
steam comes out of
the cappuccino frother.
The pump is very
quiet.
The connector of the
cappuccino frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.
T Carefully pull the cappuccino frother
down and off.
T Unscrew the black connector with the aid
of the hexagonal hole on the measuring
spoon for ground coffee.
T Clean the connector thoroughly.
T Screw the connector back on by hand.
T Carefully tighten it using the hexagonal
hole on the measuring spoon, turning by
no more than a quarter of a rotation.
Grinder is making a
very loud noise.
There are foreign objects
in the grinder.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details/ Legal information’).
‘ERROR2’ or ‘ERROR5’
is displayed.
If the machine has been
exposed to the cold for a
long period of time,
heating may be disabled
for safety reasons.
T Warm the machine at room temperature.
Other
‘ERROR’
messages are dis-
played.
–
T Switch the IMPRESSA off at the power
switch. Contact customer support in your
country (see Chapter 11 ‘JURA contact
details/ Legal information’).
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).
51
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Keep the packaging for your IMPRESSA. It should be used to protect
the machine during transport.
In order to protect the IMPRESSA from frost during transport, the
system must be emptied.
Precondition:
‘Please select product:’ is displayed.
T Carefully pull the cappuccino frother down and off.
T Place one receptacle under the connector of the cappuccino
frother and another under the hot-water spout.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Empty system’ button.
‘Remove the water tank.’
T Remove and empty the water tank.
‘Press the Rotary Switch.’, the Rotary Switch lights up.
k T Press the Rotary Switch.
‘System is emptying.’, a small amount of water flows out of
the connector of the cappuccino frother and the hot-water
spout.
The operation stops automatically. Your IMPRESSA then
switches off.
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
Transport/ Emptying the
system
Disposal
52
9 Technical data
9 Technical data
Voltage 220–240V~, 50Hz
Power 1350W
Conformity mark
A S
Energy consumption
‘Save No’ Approx. 26Wh
Energy consumption
‘Save Level 1’ Approx. 13Wh
Energy consumption
‘Save Level 2’ Approx. 17Wh
Pump pressure Static, max. 15bar
Holding capacity of water tank 2.8l
Holding capacity of bean container 280g
Holding capacity of coffee grounds
container
Max. 20portions
Cable length Approx. 1.1m
Weight 13.8kg
Dimensions (W×H×D) 31 × 37 × 45cm
Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
underside of the machine, at the centre of the edge, on the same
side as the mains cable's connection point.
53
10 Index
10 Index
A
Adding products to the start screen 28
Addresses 56
Aroma preservation cover
Bean container with aroma preservation
cover 4
Automatic switch-off 31
B
Bean container
Bean container with aroma preservation
cover 4
Cleaning 46
Filling 10
Bus bar
Technical data 52
Button
On/Off button 5
P button (programming) 5
C
Cappuccino 19
Cappuccino frother
Cleaning 38
Dismantling and rinsing 39
Rinsing 38
Central grounding point 52
Changing a name 29
Changing the product assigned to a
button 28
CLARIS Blue filter cartridge
Changing 41
Inserting and activating the filter 40
Cleaning
Bean container 46
Cappuccino frother 38
Machine 42
Coffee 17
Coffee à la carte 16, 18
Coffee à la carte mode 18
Coffee grounds container 4
Coffee spout
Height- and width-adjustable coffee
spout 4
Consistency of grind
Adjusting the grinder 14
Grinder adjustment switch 4
Contact details 56
Counter 36
Cover
Bean container 4
Filler funnel for ground coffee 4
Water tank 4
Cup grille 4
Customer support 56
D
Descaling
Machine 44
Water tank 46
Dismantling
Cappuccino frother 39
Display 5
Display messages 47
Display settings 35
Disposal 51
Double product 17
Drip tray 4
E
Emptying the system 51
Energy-saving mode 30
Errors
Troubleshooting 49
Espresso 17
F
Factory settings
Restore factory settings 32
Filler funnel
Filler funnel for ground coffee 4
Filling
Bean container 10
Water tank 15
Filter
Changing 41
Inserting and activating the filter 40
First-time use 10
With filter cartridge activation 11
Without filter cartridge activation 12
54
10 Index
Frother
Cappuccino frother 4
G
Grinder adjustment switch 4
Ground coffee 20
Grounding point 52
H
Hotline 56
Hot water 23
Hot-water spout 4
I
Instant coffee
Ground coffee 20
Internet 10
J
JURA
Contact details 56
Internet 10
L
Language 32
Latte macchiato 19
M
Machine
Cleaning 42
Descaling 44
Rinsing 37
Setting up 10
Switching off 25
Switching on 24
Mains cable 4
Maintenance 37
Daily maintenance 24
Messages, display 47
Milk
Connecting milk 15
Milk foam 20
Milk system cleaning
Cleaning the cappuccino frother 38
Milk system rinsing 33
Rinsing the cappuccino frother 38
Milk, warm 20
P
Permanently setting amounts for the
cup size 21
Permanent settings in programming
mode 26
Power switch 4
Preparation 16, 19
At the touch of a button 16
Cappuccino 19
Coffee 17
Espresso 17
Ground coffee 20
Hot water 23
In coffee à la carte mode 18
Latte macchiato 19
Milk 20
Milk foam 20
Special coffee 19
Two speciality coffees 17
Using the product selector 16
Preparation options 16
Problems
Troubleshooting 49
Product selector 16
Product settings 27
Programming mode 26
Adding products to the start screen 28
Automatic switch-off 31
Display settings 35
Energy-saving mode 30
Language 32
Product settings 27
Querying information 36
Renaming a product 29
Restore factory settings 32
Rinses 33
Setting the water hardness 34
Unit for amount of water 35
Proper use 6
Q
Querying information 36
55
10 Index
R
Renaming a product 29
Rinses 33
Rinsing
Cappuccino frother 38
Machine 37
Rotary Selection 16
Rotary Switch 5
S
Safety 6
Safety information 6
Settings
Permanent settings in programming
mode 26
Setting up
Setting up the machine 10
Short operating instructions 10
Software version 36
Special coffee 19
Spout
Hot-water spout 4
Switching off
Machine 25
Switching on
Machine 24
Switch-off
Automatic switch-off 31
Switch-on rinse 33
Symbol description 3
T
Technical data 52
Tel 56
Transport 51
Troubleshooting 49
Two products 17
U
Unit for amount of water 35
Use, First-time 10
W
Warm milk 20
Water hardness
Determining the water hardness 13
Setting the water hardness 34
Water tank 4
Descaling 46
Filling 15
Website 10
56
11 JURA contact details/ Legal information
11 JURA contact details/ Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at
www.jura.com.
The machine complies with the following directives:
U
2006/95/EC– Low Voltage Directive
U
2004/108/EC– Electromagnetic Compatibility
U
2009/125/EC– Ecodesign Directive
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your IMPRESSA may vary.
Your opinion is important to us! Use the contact link at
www.jura.com.
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.
Directives
Technical changes
Feedback
Copyright
Art. 70892/Z9/en/201207
