Loading ...
`
Spark plug misfiring
Check the spark plug gap using a feeler
gauge. The gap should be 0.7mm ≈ 0.8mm
Starting steps are not right.
Follow the right starting steps in the
starting guild.
The speed control rod is at right si
de(TORTOISE).
Turn the speed control rod to left “RABBIT”
at the end.
Use unclean fuel
Clean the fuel tank, then add clean unleade
d fuel.
Machine just starts
to work or work for
a little while, then
the machine stops.
Not enough engine oil, which cause
s the LOW oil alarm setting
Interrupt.
Add engine oil, make sure itreaches at least
“L” on the oil level.
Fuel is running out.
Add enough clean unleaded fuel.
Impurity is mixed in the fuel, the fu
el passage is blcoked.
Use clean unleaded fuel.
After engine starts. the choke lever
is still at”CHOKE” position.
After the engine starts, turn the choke lever
to right “RUN” at the end.
Filter element of air filter is blocked,
which cause air intake not
smoothly.
Clean the filter element.
Nozzle is blocked, machine is overlo
ading.
Use the needle provided to clean the
nozzle.
The speed control rod is at
“TORTOISE” position
Turn the speed control rod to left “RABBIT”
at the end.
Loading ...
Loading ...
Loading ...