Loading ...
Loading ...
Loading ...
Turning the SIDE MOUNTED Ice
Maker On and Off
To begin ice production, lower the wire signal
arm to the DOWN or ON position. The ice
maker turns off automatically when the ice
container becomes full. To stop the ice maker,
raise the wire signal arm until it clicks and
locks in the UP or OFF position.
Turning the REAR MOUNTED Ice
Maker On and Off
Ice production is controlled by the ice maker's
ON/OFF power switch. To gain access to the
ice maker, pull the ice cream shelf out. Press
the switch to the "0" position to turn it Off and
press it to the 'T' position to turn it On. The
ice maker also has a built-in wire signal arm,
which automatically stops ice production when
the ice bin is full. DO NOT use this signal arm
to manually stop the ice maker,
/
ON
Signal Arm
halArm
Small ice cubes or ice chips jamming in the
ice maker may be a sign that your water filter
needs changing. If you have a side mounted
ice maker you may also experience hollow
cubes partially frozen cubes with water inside.
When these cubes are harvested, they break
open and spill water over the other ice cubes
in the ice container, forming a solid mass of
ice. As the water filter nears the end of its
useful life and becomes clogged with particles,
less water is delivered to the ice maker during
each cycle. The ice maker can't fill every cube
in the ice maker mold, leading to small cubes
or chips that can get caught between the ice
ejector blades and the stripper. Remember,
if your ice maker is jamming with small ice
cubes or it's been six months or longer since
you last changed your water filter replace
the water filter with a new one. Poor quality
household water may require the filter to be
changed more frequently.
Ice Maker/Dispenser Tips
• Ice cubes stored too long may develop
an odd flavor. Empty the ice container as
explained below.
, Occasionally shake the ice container to keep
ice separated.
, If your refrigerator is not connected to a
water supply or the water supply is turned
off, turn Off the ice maker.
, If you need a large quantity of ice at one
time, it is best to get cubes directly from the
ice container.
• The following sounds are normal when the
ice maker is operating:
Motor running
Ice dropping into ice container
Water valve opening or closing
Ice loosening from tray
Running water
, When dispensing ice, you will hear a
snapping or clicking sound when the ice
chute opens and closes.
, Turn Off the ice maker when cleaning the
freezer and during vacations.
If you turn Off the ice maker for a
long period of time, you should also
turn off the water supply valve.
Loading ...
Loading ...
Loading ...